Hydraulic Patient Lifter

Hydraulic Patient Lifter is a very essential tool not only for paramedic and nursing staff but also for the patients, the best thing about Hydraulic Patient Lifter is that it comes with the comfortable mattress and sling which helps the attendant to lift the patient from Bed to wheel chair and vice versa (from wheel chair to bed). The Patient Lifter is 100% Made in USA However the Mattress can be customized as per the discretion or requirement by users.

https://youtu.be/m5PTtJjeS-0

Features:

About the Lifter:

The heavy-duty Lifter specifically designed to raise, lower and transport patients, differentials, transmissions and other heavy loads with minimal effort. This hoist has a 4-hole position reinforced boom, enabling four different load capacities. The vertical lifting ram gets items raised to the maximum rated lifting capacity with ease. Some assembly required. Meets ASME PASE safety standards.

Lifting Range:

Lifting range: 1″ to 90″

Raising/Lowering Model Hydraulic Lifts
There are two controls on the pump assembly:
1. The control valve
2. The pump handle

Raising the Lift

The control valve MUST be in the closed position (control valve positioned towards pump handle) to move the pump handle up and down to elevate the boom and the patient.

Lowering the Lift

The control handle MUST be in the open position (control valve positioned away from pump handle) to lower the boom and the patient. The rate of descent can be controlled by varying the amount that the control valve is opened.

Dragging the Unit:

It is very simple to drag and drop carefully patients either on wheel chair or Patient Bed, Hydraulic Patient Lifter has 100% best quality wheels installed which enables the attendant to move it even easier.

Lifting the Patient

• Using the steering handle, push the patient lift underneath the bed.
• Lower the patient lift for easy attachment of the sling hardware or straps

Do one of the following:

• Chains, O-Rings and D-Rings: After the chains, O-Rings or D-Rings are attached and the S-hooks are secured in both sides of the sling sections (open end facing outward), place the D-rings of the strap assembly or the O-ring and chain link of the chain assembly over the chain hooks of the swivel bar.
• Chain-Free All Fabric Slings: Attach the color-coded straps to the strap hooks of
  the swivel bar.