Oxygen Suction Flowmeter Precision UK
Oxygen Suction Flowmeter Precision UK
Oxygen Suction Flowmeter Precision UK – The Precision CPX Bubble flow meter shall be supplied with connection probes to BS 5682, other country standards available e.g. DIN, NFPA, AFNOR, JIS, SS, ISO European
Gas Specificity
Flow meter’s shall be supplied with gas specific probes and only attach to the corresponding medical gas terminal unit, it accurately measures flow at 0-15Lpm even at variant inlet pressures. Accuracy is fulfilled within 10% to attain maximum efficiency for patient and environment.
Each flow meter is calibrated at 50 psi inlet pressure
Materials
Flow meter shall be manufactured to EN 13220:1999 and ISO 15002:2008 and constructed from chromium-plated brass body, inner and external tube in crack resistant polycarbonate and stainless steel ball. Other pieces shall be in brass.
Humidifier:
Constructed from polycarbonate, Sterilisation should be conducted in an autoclave on a 25 min cycle at 121 ºC, 1.3 kPa (max. 40 times). Before sterilisation remove the tube and diffuser and consequently disposed.
Quality:
Manufactured under BS EN 13485 Medical Devices: Quality Management Systems and carries CE0086 Class IIb Medical Device certification.
Warranty
The flow meter shall have a two-year warranty, subject to the recommended minimum routine maintenance operations being carried out by correctly competent persons.
For more information regarding rates, quotations, queries or any questions please feel free to contact us at +92-322-4602203 Email: zirarenterprises@gmail.com, info@zirarenterprises.com
Oxygen Suction Flowmeter Precision UK
Oxygen Suction Flowmeter Precision UK – The Precision CPX Bubble flow meter shall be supplied with connection probes to BS 5682, other country standards available e.g. DIN, NFPA, AFNOR, JIS, SS, ISO European
Gas Specificity
Flow meter’s shall be supplied with gas specific probes and only attach to the corresponding medical gas terminal unit, it accurately measures flow at 0-15Lpm even at variant inlet pressures. Accuracy is fulfilled within 10% to attain maximum efficiency for patient and environment.
Each flow meter is calibrated at 50 psi inlet pressure
Materials
Flow meter shall be manufactured to EN 13220:1999 and ISO 15002:2008 and constructed from chromium-plated brass body, inner and external tube in crack resistant polycarbonate and stainless steel ball. Other pieces shall be in brass.
Humidifier:
Constructed from polycarbonate, Sterilisation should be conducted in an autoclave on a 25 min cycle at 121 ºC, 1.3 kPa (max. 40 times). Before sterilisation remove the tube and diffuser and consequently disposed.
Quality:
Manufactured under BS EN 13485 Medical Devices: Quality Management Systems and carries CE0086 Class IIb Medical Device certification.
Warranty
The flow meter shall have a two-year warranty, subject to the recommended minimum routine maintenance operations being carried out by correctly competent persons.
For more information regarding rates, quotations, queries or any questions please feel free to contact us at +92-322-4602203 Email: zirarenterprises@gmail.com, info@zirarenterprises.com
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
AGSS Medical Air Plant – British Standard
AGSS Medical Air Plant - British Standard
Precision UK’s CPX AGSS Medical Air Plant - British Standard is manufactured under BS EN 13485 Medical Devices: Quality Management Systems. It provides a centralized or dedicated source for the safe removal of exhaled anaesthetic gases from within the theater, available in simplex and duplex pump configurations dependent on individual requirement. For more information about the product, questions, queries and quotations please call us at +92-322-4602203 or Email us info@zirarenterprises.com, zirarenterprises@gmail.com Technical Specification:- HTM 02-01: Medical Gas Pipeline Systems
- C11 NHS: Model Engineering Specification – Medical Gases
- BS EN 6834: Specification for Active Anaesthetic Gas Scavenging Systems
- ISO 7396-2: Anaesthetic Gas Scavenging Disposal Systems
- CPX® branded solid British design
- Control and highly visible indication panel
- CE marked under Medical Device Directive 93/42/EEC with approval from British Standards Institute CE0086 classified as Class IIa Medical Device
- All interconnecting pipework is included
- Copper stubbed outlet and inlet pipework for ease of connecting to MGPS
- Available in Single or 3 Phase
- Anti-vibration mounts on all pumps
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Pre-set vacuum relief valve and low pressure sensors
- Low voltage (24V) remote switches
- Visible condensate drain flask fitted to exhaust
- Easy to install 4 wire + earth remote switch wiring
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
Bed Head Unit Horizontal
Bed Head Unit Horizontal
Bed Head Unit Horizontal widely used in hospitals and which provides patients a good care, backed by invisible medical gas copper pipe lines, electric sockets it is pertinent to notice that we at Zirar Enterprises have installed these units in many renowned hospitals. please feel free to contact us anytime for assistance +923224602203 If you want bed head unit vertical then click on this link bellow Bed Head unit vertical
Degreased Copper Tube British Standard
Degreased Copper Tube British Standard
Degreased Copper Tube British Standard is Precision UK’s CPX Degreased Copper Tube British Standard is manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. All tube is manufactured under strict quality control procedures to ISO 9001:2008. CPX tube is the only British manufactured tube that is CE marked as a class IIa Medical Device 93/42/EEC with notified body British Standards Institute under CE0086. It is suitable for jointing degreased medical gas copper fittings and other medical gas equipment compliant to BS EN 13348, BS EN 1057, BS 2871 Part 1 Table X, EN 7396 and HTM 02-01. CPX copper tube is designed for use in Medical Gas Pipeline System (MGPS) installations and incorporates the specialist requirement of the MGPS industry to include cleanliness, packaging and usability required to attain the levels of quality as stated particularly in HTM 02-01. Specification: -- Each pipe is cleaned to have a maximum carbon level 0.20mg/dm².
- Each pipe is individually end capped and bundled in sealed polythene bags to maintain cleanliness.
- Chemical composition CU.DHP to ISO 1190-1/CW024A to EN1412.
- All copper tube is manufactured under strict quality control procedures to ISO 9001 and CE marked under the Medical Device Directive 93/42/EEC (CE0086) Class IIa.
- BSI Kitemarked
- Batch numbering for traceability is included on all pipework.
- All copper tube from sizes 12mm through to 108mm are engraved/permanently ink marked with the following information: EN 13348, nominal dimensions, manufacturer details, part no., CE Mark, Medical Device Directive to 93/42/EEC, time and date of production.
- 25 year guarantee.
Designing and planning of ICU
Designing and planning of ICU
For Designing and planning of ICU. We have one best expertise in designing and planning of intensive care unit (ICU) we have ample experience in this category. We already manufactured and installed it to one of the best and renowned hospitals nation wide for more information please contact 0322-4602203
Hermetic Doors
Hermetic Doors
Hermetic Doors also known as Hermetic sliding door or automatic doors are required where hygiene and the leakage of air control is critical. These doors takes less space and sealed completely form the edges so no air, gases or dust particles can pass through out of the operation theater. We have best team in market to install these doors with top quality material at very competitive prices. For further queries feel free to contact us 0322-4602203
Medical Air Plant – British Standard
Medical Air Plant - British Standard
Medical Air Plant - British Standard - Precision UK’s CPX Medical Air Plant is manufactured under BS EN 13485 Medical Devices: Quality Management Systems. It provides a centralized source of medical air, available in simplex to multi-pump configurations dependent on individual requirement.
Specification:
- Specific Benefits Include
- Fully complies to HTM 02-01, HTM 2022, C11, BS EN 7396, CE0086 Class IIb
- CE marked under Medical Device Directive 93/42/EEC
- CPX® branded solid British design
- Control and highly visible indication panel
- All interconnecting pipework is included
- Outlet pipework for connecting to the pipeline
- Anti-vibration mounts on all compressors
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Digital display touchscreen with user interface
- 400Kpa, 700Kpa and 1000Kpa output versions available
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
Medical Gas Outlets Precision UK
Medical Gas Outlets Precision UK
Medical Gas Outlets Precision UK also known as CPX Terminal Units are designed and manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. The units comprise of a first fix, second fix and a second fix valve assembly and connect medical appliances to the gas supply system. Please also see our Medical Gas Outlets Precision UK & Medical Gases & Infrastructure The first fix comprises of a brass pipeline termination cylinder with a 12mm BS EN 13348 copper pipe for brazing to the fixed pipeline system, or with a NIST BS EN 18082 (non-interchangeable screw thread) connector for connection to a hose assembly. A mounting box suitable for both surface and flush installations is also provided. CPX British Standard and DIN Standard Gas Outlets utilize a common first fix assembly. The CPX Terminal Unit is designed to enable gas probes to be connected and disconnected easily and with minimal effort and the same time as giving a strong, reliable and secure connection. They are available for oxygen, nitrous oxide, 50% oxygen/50% nitrous oxide mixture, medical air, surgical air, medical vacuum, carbon dioxide, nitrogen and AGSS. The terminal units can be flexibly integrated into any type of installation including surface, flush, bedhead and pendant and are supplied with a 3 year warranty. Test plugs are included with flush, surface, and bedhead types for first fix pressure testing on site. DIN Standard CPX DIN gas outlets are manufactured and designed in our UK factory, full metal construction, Gas Indexing as EN 13260-2, EN 9170 and Medical Gas Pipelines EN 7396.
Standards: Designed to Meet the requirements of
Medical Gas Outlet Precision UK
- HTM 02-01 Medical gas Pipeline Systems
- BS EN 7396-1 Pipelines for Compressed medical Gases and Vacuum
- BS EN 7396-2 Anaesthetic Gas Scavenging Disposal Systems
- BS EN 9170-1 Terminal Units for use with Compressed Medical Gases and Vacuum
- BS EN 9170-2 Terminal Units for Anaesthetic Gas Scavenging Systems
- C11 NHS Model Engineering Specification – Medical Gases
- BS EN 18082 Non-interchangeable Screw Threaded (NIST) Low-pressure Connectors for Medical Gases
- BS 5682 Specification for Probes Specification for Probes (quick connectors) for Medical Gases.
- Medical Device Directive 93/42/EEC (CE0086) Class IIb.
- DIN 13260-2 Part 2: Dimensions and allocation of Probes and Gas specific connection points for Terminal Units
- Available for Oxygen, Nitrous Oxide, Medical Air, CO2, Motor Air and Vacuum (other gases available on request)
- Incorporating a 12mm copper stub pipe to EN 13348 to allow easy connection to the Medical Gas Pipeline system, other options include NIST or DISS type fittings for pendants or bed head units.
- Probe insertion design incorporates parking position and full insert for 100% operation, each outlet is supplied with Flush/Surface Box or Bed Head Plate mounting options and include a 3-year warranty.
- CE marked CE0086 Class IIb Medical Device.
Oxygen Gas Company Pakistan
Oxygen Gas Company Pakistan
Oxygen Gas Company Pakistan Zirar Enterprises is one the leading Medical Oxygen O2 producer and supplier in Pakistan. We deliver high purity level medical oxygen and other gases all over Pakistan. Our Medical Oxygen plant is portable which produce high purity level medical oxygen in Pakistan and because of that portable uniqueness you can avoid the hassle of moving cylinders out of your hospital oxygen rooms. We also have different size of oxygen cylinder’s deliverable anywhere in Pakistan. No matter if you need Medical oxygen in bulk quantity or a single cylinder give us a call or message and member of our team will be at your door step to deliver as soon as possible anywhere in Pakistan. Our oxygen generators are meeting international standards required for oxygen production in the medical and pharmaceutical sector. Role of Medical Oxygen Oxygen is often used in medical assistance or emergency and the availability of medical oxygen can make the difference between life and death and during these challenging time (Covid-19) it is necessary to ensure the oxygen supply at all times. Consumption of a Hospital Our staff is very well trained to calculate the medical oxygen and other gases for the individual consumption of your hospital or clinic. Consumption in Industrial Sector Oxygen can be used in different sectors and different scenarios however we are able to provide the best quality oxygen for industrial needs, industrial personnel can contact us on the below mentioned address and our vehicle will be there in no time and refill the oxygen at spot. Your Merits- Exact purity 88% ~ 99.99%
- Oxygen at any time and at any place
- Cost-effective
- Reliable technology
- Non-hazard
- In house placement and production
Reviews
There are no reviews yet.