Oxygen Suction Flowmeter Precision UK
Oxygen Suction Flowmeter Precision UK
Oxygen Suction Flowmeter Precision UK – The Precision CPX Bubble flow meter shall be supplied with connection probes to BS 5682, other country standards available e.g. DIN, NFPA, AFNOR, JIS, SS, ISO European
Gas Specificity
Flow meter’s shall be supplied with gas specific probes and only attach to the corresponding medical gas terminal unit, it accurately measures flow at 0-15Lpm even at variant inlet pressures. Accuracy is fulfilled within 10% to attain maximum efficiency for patient and environment.
Each flow meter is calibrated at 50 psi inlet pressure
Materials
Flow meter shall be manufactured to EN 13220:1999 and ISO 15002:2008 and constructed from chromium-plated brass body, inner and external tube in crack resistant polycarbonate and stainless steel ball. Other pieces shall be in brass.
Humidifier:
Constructed from polycarbonate, Sterilisation should be conducted in an autoclave on a 25 min cycle at 121 ºC, 1.3 kPa (max. 40 times). Before sterilisation remove the tube and diffuser and consequently disposed.
Quality:
Manufactured under BS EN 13485 Medical Devices: Quality Management Systems and carries CE0086 Class IIb Medical Device certification.
Warranty
The flow meter shall have a two-year warranty, subject to the recommended minimum routine maintenance operations being carried out by correctly competent persons.
For more information regarding rates, quotations, queries or any questions please feel free to contact us at +92-322-4602203 Email: zirarenterprises@gmail.com, info@zirarenterprises.com
Description
Oxygen Suction Flowmeter Precision UK
Oxygen Suction Flowmeter Precision UK – The Precision CPX Bubble flow meter shall be supplied with connection probes to BS 5682, other country standards available e.g. DIN, NFPA, AFNOR, JIS, SS, ISO European
Gas Specificity
Flow meter’s shall be supplied with gas specific probes and only attach to the corresponding medical gas terminal unit, it accurately measures flow at 0-15Lpm even at variant inlet pressures. Accuracy is fulfilled within 10% to attain maximum efficiency for patient and environment.
Each flow meter is calibrated at 50 psi inlet pressure
Materials
Flow meter shall be manufactured to EN 13220:1999 and ISO 15002:2008 and constructed from chromium-plated brass body, inner and external tube in crack resistant polycarbonate and stainless steel ball. Other pieces shall be in brass.
Humidifier:
Constructed from polycarbonate, Sterilisation should be conducted in an autoclave on a 25 min cycle at 121 ºC, 1.3 kPa (max. 40 times). Before sterilisation remove the tube and diffuser and consequently disposed.
Quality:
Manufactured under BS EN 13485 Medical Devices: Quality Management Systems and carries CE0086 Class IIb Medical Device certification.
Warranty
The flow meter shall have a two-year warranty, subject to the recommended minimum routine maintenance operations being carried out by correctly competent persons.
For more information regarding rates, quotations, queries or any questions please feel free to contact us at +92-322-4602203 Email: zirarenterprises@gmail.com, info@zirarenterprises.com
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Bed Head Unit Horizontal NTC 200
Bed Head Unit Horizontal NTC 200
Bed Head Unit Horizontal NTC 200 unit system is surface mounted to the comfort of patients and their proper care during their stay in the hospital. Using extruded aluminum profile alloy 6063. Design and functionality convince the patient and hospital user. Easy to installed and maintenance reduce time. 2 mm Bed Head profile aluminum thickness. The hospital bed head unit lighting parts are designed to provide the best diffusion of light. The lamp unit consisting of direct, indirect and night light. NTC series is available in both LED and fluorescent versions. It’s optical design all perfect control of the lighting. Manufactured by AMCAREMED Please see our complete range of BED HEAD UNITS Completely modular and adaptable to your needs can include:- Length according to different request
- Gas outlet, according to different standards
- Light is available in both LED and fluorescent versions. Its optical design allows perfect control of the lighting
- Power socket accept different standards and voltages
- Communication plugs (Network port, Phone…etc.)
- Designed in accordance with HTM 2022 standard
- 2 MM thickness of the profile aluminum
- The Bed Head Trunking length according to request
- Provide medical gas outlets, electric socket, lamps, electrical switches and other equipment
- The bed head unit light is available in both LED and fluorescent versions
- Its optical design allows perfect control of the lighting
- Can be customized and upgraded to meet your need
- Model: NTC 200
Bed Head Unit Vertical
Bed Head Unit Vertical
Bed Head Unit Vertical is our specialty we at Zirar Enterprises install, assemble, fabricate and manufacture Bed Head Unit Vertical types and their composition are additionally extreme basic piece of the clinics, hospitals etc and it not only facilitate patients but also gives accommodation to the paramedic and nursing staff for better vertical view and to perform their life saving duties. Further essential advantage of vertical bed head unit is that it covers less space as compared to horizontal bed head units. Our specialized staff is totally all around, prepared and well taught in this specific field. please feel free to contact us anytime, we shall be glad to pay free visit, testing and commissioning. For post view click on this link Bed Head Vertical Technical Specification: - Material: Material is made of 99.9% pure aluminum, extruded from imported billet. Thickness: 2mm Size of Bed head unit: Standard size is 4 feet, but you can also customize as per your discretion. Paint: Jotun paint which is powdered coated, you can also choose paint of your choice. Color: Color can also be customize of customer's choice. Electrical Equipment: Clipsal, Australia. Electrical Accessories: 01 on and 01 off switch with 01 multi functional two pair of schuko sockets. Our valued clients can also modify it with their discretionary electrical accessories. Electrical Cables: For vertical bed head units we use one of the best electrical cables such as GM Cables, Newage Cables and Pakistan cables. However customer can also choose the cable brand as per their feasibility and budget. Patient Light: 600mm LED Light. Warranty: One year warrant with after sale service within a year, and 02 years paint warranty. Projects Completed:- Dow Medical University, Karachi
- Sheikh Zaid Hospital, Lahore
- Women Medical College, Islamabad
- Combined Military Hospital, Rawalpindi
- Ali Medical Complex, Islamabad
- Jinnah Hospital, Lahore
- Doctors Hospital, Lahore
- Omer Hospital, Lahore
- Rehman Medical Institute Peshawar
Designing and Planning of Dialysis unit
Designing and Planing of Dialysis Unit
Designing and Planing of Dialysis Unit in Kidney center is very important. We keep the record of all dialysis units and kidney centers so that we design, plan and manufacture the whole dialysis unit in very low prices for more information and specification please contact 0322-4602203
Hermetic Doors
Hermetic Doors
Hermetic Doors also known as Hermetic sliding door or automatic doors are required where hygiene and the leakage of air control is critical. These doors takes less space and sealed completely form the edges so no air, gases or dust particles can pass through out of the operation theater. We have best team in market to install these doors with top quality material at very competitive prices. For further queries feel free to contact us 0322-4602203
Liquid Oxygen Tanks and Generators
Liquid Oxygen Tanks and Generators
Precision UK’s Liquid Oxygen Tanks and Generators and Cryogenic Bulk Tanks can be used for a variety of applications and are part of the high performance CPX LOX range. LOX Tanks are stationary, vacuum-insulated pressure vessels for storage of cryogenic liquefied gases. Low evaporation rate, ergonomic layout of instruments and controls for ease of use, carefully selected components and outstanding build quality ensure a high degree of reliability and economy in everyday use and guarantee the longevity of the vessel. Vessels are available in vertical or horizontal configurations, sized from 2,200 to 200,000 litres, and are manufactured and tested according to the European Pressure Equipment Directive 97/23 CE (PED) or to the regulations of other countries. VIE Control Panels available 500l/min-6000l/min. (Please contact sales office for further details.) Click here for oxygen generators price in Pakistan Our vessels have been in use world-wide for decades. High quality is ensured by measures, including a quality management system complying to ISO 9001.
Oxygen Generators
- The Precision UK, CPX Oxygen Generating Plant provides a centralized source of Oxygen up to 95% +/- 3% purity available in a variety of configurations.
- The stations are readily equipped with O2 analyzers, complete with an Alarm to ensure the produced purity of the O2 is controlled and not less than the programmed parameter.
- Digital Touchscreen controls with factory preset configuration shall incorporate; Pictorial easy to read images, O2 concentration %, Receiver pressure, Oxygen Capacity, Operating Instructions and Manual. *Bespoke design service available.
- Oxygen Generators are available in customer specific requirements. Our standard ranges are 100l/min – 2000l/min.
- Manufactured in our UK factory, fully tested and ready to install our generator is CE marked and is in standards compliance with ISO 10083 and conforms to HTM and EN Standards.
See our Oxygen Generator Plant in Pakistan Ready Stock
https://youtu.be/r1rRwTwuiTM General Information:- When we talk about oxygen generators price in Pakistan and oxygen refilling in Pakistan there are a lot of thoughts come into one's mind that oxygen refilling or Oxygen Generators usage is not possible and it required some sort of space science. well that's not the case here. Zirar Enterprises are one of the leading company to install Oxygen Generators in Pakistan and the good thing about these generators are that hospitals and clinics do not required liquid storage tanks. The Oxygen Generators can generate the compressed oxygen and directly supply into hospital lines. For more information regarding prices, quotations or any other queries please feel free to contact us at zirarenterprises@gmaail.com, info@zirarenterprises.com, +92-322-4602203
Medical Air Plant – British Standard
Medical Air Plant - British Standard
Medical Air Plant - British Standard - Precision UK’s CPX Medical Air Plant is manufactured under BS EN 13485 Medical Devices: Quality Management Systems. It provides a centralized source of medical air, available in simplex to multi-pump configurations dependent on individual requirement.
Specification:
- Specific Benefits Include
- Fully complies to HTM 02-01, HTM 2022, C11, BS EN 7396, CE0086 Class IIb
- CE marked under Medical Device Directive 93/42/EEC
- CPX® branded solid British design
- Control and highly visible indication panel
- All interconnecting pipework is included
- Outlet pipework for connecting to the pipeline
- Anti-vibration mounts on all compressors
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Digital display touchscreen with user interface
- 400Kpa, 700Kpa and 1000Kpa output versions available
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
Medical Gas Outlets Precision UK
Medical Gas Outlets Precision UK
Medical Gas Outlets Precision UK also known as CPX Terminal Units are designed and manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. The units comprise of a first fix, second fix and a second fix valve assembly and connect medical appliances to the gas supply system. Please also see our Medical Gas Outlets Precision UK & Medical Gases & Infrastructure The first fix comprises of a brass pipeline termination cylinder with a 12mm BS EN 13348 copper pipe for brazing to the fixed pipeline system, or with a NIST BS EN 18082 (non-interchangeable screw thread) connector for connection to a hose assembly. A mounting box suitable for both surface and flush installations is also provided. CPX British Standard and DIN Standard Gas Outlets utilize a common first fix assembly. The CPX Terminal Unit is designed to enable gas probes to be connected and disconnected easily and with minimal effort and the same time as giving a strong, reliable and secure connection. They are available for oxygen, nitrous oxide, 50% oxygen/50% nitrous oxide mixture, medical air, surgical air, medical vacuum, carbon dioxide, nitrogen and AGSS. The terminal units can be flexibly integrated into any type of installation including surface, flush, bedhead and pendant and are supplied with a 3 year warranty. Test plugs are included with flush, surface, and bedhead types for first fix pressure testing on site. DIN Standard CPX DIN gas outlets are manufactured and designed in our UK factory, full metal construction, Gas Indexing as EN 13260-2, EN 9170 and Medical Gas Pipelines EN 7396.
Standards: Designed to Meet the requirements of
Medical Gas Outlet Precision UK
- HTM 02-01 Medical gas Pipeline Systems
- BS EN 7396-1 Pipelines for Compressed medical Gases and Vacuum
- BS EN 7396-2 Anaesthetic Gas Scavenging Disposal Systems
- BS EN 9170-1 Terminal Units for use with Compressed Medical Gases and Vacuum
- BS EN 9170-2 Terminal Units for Anaesthetic Gas Scavenging Systems
- C11 NHS Model Engineering Specification – Medical Gases
- BS EN 18082 Non-interchangeable Screw Threaded (NIST) Low-pressure Connectors for Medical Gases
- BS 5682 Specification for Probes Specification for Probes (quick connectors) for Medical Gases.
- Medical Device Directive 93/42/EEC (CE0086) Class IIb.
- DIN 13260-2 Part 2: Dimensions and allocation of Probes and Gas specific connection points for Terminal Units
- Available for Oxygen, Nitrous Oxide, Medical Air, CO2, Motor Air and Vacuum (other gases available on request)
- Incorporating a 12mm copper stub pipe to EN 13348 to allow easy connection to the Medical Gas Pipeline system, other options include NIST or DISS type fittings for pendants or bed head units.
- Probe insertion design incorporates parking position and full insert for 100% operation, each outlet is supplied with Flush/Surface Box or Bed Head Plate mounting options and include a 3-year warranty.
- CE marked CE0086 Class IIb Medical Device.
Oxygen Gas Company Pakistan
Oxygen Gas Company Pakistan
Oxygen Gas Company Pakistan Zirar Enterprises is one the leading Medical Oxygen O2 producer and supplier in Pakistan. We deliver high purity level medical oxygen and other gases all over Pakistan. Our Medical Oxygen plant is portable which produce high purity level medical oxygen in Pakistan and because of that portable uniqueness you can avoid the hassle of moving cylinders out of your hospital oxygen rooms. We also have different size of oxygen cylinder’s deliverable anywhere in Pakistan. No matter if you need Medical oxygen in bulk quantity or a single cylinder give us a call or message and member of our team will be at your door step to deliver as soon as possible anywhere in Pakistan. Our oxygen generators are meeting international standards required for oxygen production in the medical and pharmaceutical sector. Role of Medical Oxygen Oxygen is often used in medical assistance or emergency and the availability of medical oxygen can make the difference between life and death and during these challenging time (Covid-19) it is necessary to ensure the oxygen supply at all times. Consumption of a Hospital Our staff is very well trained to calculate the medical oxygen and other gases for the individual consumption of your hospital or clinic. Consumption in Industrial Sector Oxygen can be used in different sectors and different scenarios however we are able to provide the best quality oxygen for industrial needs, industrial personnel can contact us on the below mentioned address and our vehicle will be there in no time and refill the oxygen at spot. Your Merits- Exact purity 88% ~ 99.99%
- Oxygen at any time and at any place
- Cost-effective
- Reliable technology
- Non-hazard
- In house placement and production
Reviews
There are no reviews yet.