Medical Equipment's
AED Defibrillator Rescue Sam, Progetti, Italy
AED Defibrillator Rescue Sam, Progetti, Italy
Automated External Defibrillator AED Defibrillator Rescue Sam, progetti Italy helps tackle Sudden cardiac arrest (SCA) associated with ventricular fibrillation (VF) remains a leading cause of unexpected death in the Western world. It has been estimated that chances for survival from SCA decrease approximately 7% to 10% with each passing minute and that survival rates after 12 minutes are only 2% to 5%. The most common cause of SCA is ventricular fibrillation (VF), a lethal heart rhythm, and survival depends on the rapid treatment called defibrillation, an electrical shock sent to the heart to resume normal and healthy rhythm. So early defibrillation is the sole definitive determinant of survival and is the key factor in cardiopulmonary resuscitation. Currently, fewer than 5% of the 60.000 persons who experience out-of-hospital cardiac arrest each year survival to hospital discharge. Specification: AED Defibrillator Rescue Sam, Progetti, Italy Shockable rhythms: fibrillation and/or tachycardia Not Shockable rhythms: different from VF and VT Waveform: BTE (biphasic truncated exponential) Impedance: compesated Guide Lines: AAMI DF39 2010 / AHA 2010 Shock Energy Accuracy: according to IEC EN60601-2-4 Patient Isolation: type BF Impedance: 25 – 175 Ώ OPERATING MODE: Semi Automatic ENERGY: 200 j Fixed as new guidelines AHA 2010 PROTOCOL: Voice prompts and indicators guide user through protocol CHARGE CONTROL: automatic by software CHARGE TIME from Shock Advised: < 8 Sec, typical with new battery CONTROLS: Shock button, info-button, On/Off Button INDICATORS: 6 Leds and 3 scenarios WEIGHT: 2,2 Kg with battery pack installed SELF TEST: automatic and user activated Optional special adapter pack for data transmission to PC via USB - Data Stored: first 60 minutes of ECG and the entire incident’s events and analysis decisions - PC Software for Data Management BATTERY -Type: 12 Volt DC, 4,2 Ah, Lithium manganese dioxide, long life -Model number: ELRS-002 -Capacity: min 200 shocks or 4 hours of operating time continuously -Shelf life: typically 5 years (prior to installation) -Standby life: typically 5 years (after installation) -Don’t install battery packs after the expiration date the battery is not rechargeable -Don’t immerse battery pack into the water or other liquidsInfusion Pump St-1000 Samtronic
Brand: Samtronic, Brazil
Model: ST-1000
please click here to download the full catalog infusionpump samtronic.pdf
Degreased Medical Gas Copper Fittings
Degreased Medical Gas Copper Fittings
Degreased Medical Gas Copper Fittings CPX end feed copper fittings a.k.a Degreased Medical Gas Copper Fittings are manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. They are suitable for jointing degreased medical gas copper tube pipelines compliant to BS EN 13348, BS EN 1057 and BS 2871 Part 1 Table X as quoted in HTM 02-01 and C11. Exclusively designed for Medical Gas Pipeline Systems (MGPS), CPX copper fittings recognize and embrace the specialist requirements of the medical gas pipeline industry to include all aspects of design, cleanliness, packaging and usability required to become a successful partner for installations of pipelines compliant with HTM 02-01, C11 and BS EN 7396. Specification: -- All CPX degreased copper fittings are engraved with the following information: EN 1254, size, manufacturer details.
- Each fitting is individually bagged in a clear protective polythene bag and sealed to maintain cleanliness
- Each bag is labelled with the degreased specification, product code and production batch number.
- Cleanliness is guaranteed below 0.01 mg/cm² of hydrocarbons on the degreased surface of the fitting.
- All boxes include logical and concise labeling identification.
- 25 Year guarantee.
- Available in all sizes
Spinal Board CV56
Handheld Single channel ECG Machine Meditech
Handheld Single channel ECG Machine Meditech
Handheld Single channel ECG Machine Meditech Model: EK101t is a Smart handheld single channel ECG with interpretation, Color & Touch screen. Storage more than 450 exam, Built-in lithium rechargeable battery, Auto-measurement, auto-analysis and auto-interpretation. USB and LAN socket Comes with PC Software and USB Connector. For prices, quotations and queries please feel free to contact us +92-322-4602203 or Email: zirarenterprises@gmail.com, info@zirarenterprises.com Product Features:- High resolution thermal-array output system (8 dots/mm) 150Hz.
- Large Screen shows 12/6/3/1 Lead(s) and remark real-time and continuously. ECG101T Display Keyboard
- The remark includes: lead sign sensitivity paper speed filter state etc.
- Touch TFT screen shows the working status
- Safety Class: Class I Type CF applied part with defibrillation protection.
- AC and DC. Power Supply and built-in lithium polymer rechargeable battery
- Record 450 pieces of ECG and review the stored cases and patient information anytime.
- Print & store different time length of case to convenient for doctor's case review and statistics.
- Selectable print mode print length gain paper speed and report print selection. And for 4 hours continually under the best DC state.
- Exterior SD card convenient for use. With SD card the device can store 100 case most.
- USB2.0 port working mode can be selected freely between store and synchronization.
- Digital signal processing to obtain the ECG of higher quality by AC DFT and EMG filter.
- Auto-measurement interpretation and auto-diagnosis of regular ECG parameter
- Small in Size 1.20 Size: 207mm (L) ×96mm (W) ×62mm (H) and light in weight 0.6 kg
COMES WITH PC SOFTWARE FOR DATA TRANSFER
TECHNICAL SPECIFICATION:
- Lead: Standard 12 leads
- Patient leak current: <10μA
- Input impedance: ≥5MΩ
- Frequency response: 1Hz~75Hz
- Time constant: Time constant>3.2s
- CMRR: >60dB
- EMG interference filter: 25/35Hz(-3dB)
- Recording way: Thermal array printing system
- Specification of recording paper: 50mm(W)×20m(L) high-speed thermal paper
- Auto record: 25mm/s 50mm/s error:±5%
- Rhythm record: 25mm/s 50mm/s error:±5%
- Manual record:5mm/s 6.25mm/s10mm/s 12.5mm/s 25mm/s 50mm/s error:±5%.
- Sensitivity selections: 2.55102040mm/mV 5 options error:±5%. Standard sensitivity is 10mm/mV±0.2mm/mV .
- Auto record: Record setup according to record format and auto mode automatically changing leads measuring and analysing.
- Manual record: Record setup according to record format manually changing leads.
- Measurement parameters: HR P-R interval P Duration QRS Duration T Duration Q-T interval Q-Tc P Axis QRS Axis T Axis R(V5) S(V1) R(V5)+S(V1)
- Product safety type: Class I Type CF defibrillation proof applied part.
- Enduring polarization voltage: ±300mV
- Noise level: ≤15μVp-p
- Fuse specification: 2 pcs φ5×20mm AC time lag; T1.6A/250V(Power supply 220V) Operation: a) Environment temperature: +5℃~+35℃ b) Relative humidity: ≤80% c) Power supply: AC:100~240V50/60Hz DC:7.4V 3700 mAh rechargeable lithium battery d) Atmospheric pressure: 86kPa~106kPa
Portable Electric Suction Pump – New Askir 20
Portable Electric Suction Pump - New Askir 20
Portable Electric Suction Pump - New Askir 20 is suitable for nasal, oral and endotracheal aspiration of bodily fluids (mucus or catarrh) from adults and children. Indicated for tracheotomized patients, minor surgical applications and post-operative therapy, NEW ASKIR 20 finds application in out-patient and in-patient care, elderly care and in private care. ACCESSORIES INCLUDED - Liquid Collection Jar with overflow valve system (different options, see below) - 6x10mm Silicone Tubes, length 140cm (autoclavable) + Conical Connector ø 8-9-10mm - Antibacterial & Hydrophobic Filter (single-patient) - CH20 Canula - Power Cord with Schuko plug OPTIONS - Stand on 5 Castors Ø 50mm with Brakes (antistatic upon request) REF 27730 - Carrying Bag (for 1000ml jar) SP 0207/02 - Carrying Bag (for 2000ml jar) SP 0207 TECHNICAL FEATURES- Motor: Oiless and maintenance-free piston pump
- Power Feeding: 220/230V-50/60Hz - other configurations on request
- ISO 10079-1 Classification: HIGH VACUUM / LOW FLOW
- Max Vacuum (adjustable): -0.75 bar -75 kPa -563 mmHg
- Max free air flow rate: 16 l/min
- Noise Level: 60,5 dBA
- Duty cycle: Non-stop operation
- Weight kg: 2.50
- Size cm: 35 x 21 x 18
- Years of Warranty: 2
- Shipping carton: 3
- Place of Manufacturing Italy
- IP Code IP21
Portable Suction Unit – Hospivac 350 Italy
Portable Suction Unit - Hospivac 350 Italy
Portable Suction Unit - Hospivac 350 Italy has been designed for professional aspiration of bodily fluids, tissues or bones of the patient during or after surgery. The state-of-the-art oiless pump guarantees high performances with excellent suction capacities and max vacuum reachable within a few seconds, with no need for maintenance. A clear dashboard along with a full range of accessories makes it the ideal device for surgical suction and liposuction. TECHNICAL FEATURES- Motor Oiless and maintenance-free piston pump
- Power Feeding 220/230V-50/60Hz - other configurations on request
- ISO 10079-1 Classification HIGH VACUUM / HIGH FLOW
- Max Vacuum (adjustable) -0.90 bar -90 kPa -675 mmHg
- Max free air flow rate 60 l/min
- Noise Level 51,7 dBA
- Duty cycle Non-stop operation
- Weight kg 13
- Size cm 46 x 85 x 42
- Years of Warranty 2
- Shipping carton 1
- Place of Manufacturing Italy
FEATURED PRODUCTS
ELECTRONICS
Eames lounge chair
Classic wooden chair
Decoration wooden present
Nam gravida vulputate est venenatis eu at ullamcorper consectetur parturient suspendisse a elit lobortis ut convallis vestibulum vulputate nunc praesent mattis sem faucibus risus sociosqu.Dapibus curae a ac vestibulum a magnis ullamcorper orci a iaculis adipiscing augue a massa a torquent feugiat a. Scelerisque vestibulum.
Wine bottle lantern
iPhone dock
Augue adipiscing euismod
INNOVATIVE GADGETS
Exploring Atlanta’s modern homes
Vivamus enim sagittis aptent hac mi dui a per aptent suspendisse cras odio bibendum augue rhoncus laoreet dui praesent sodales sod...
Green interior design inspiration
A sed a risusat luctus esta anibh rhoncus hendrerit blandit nam rutrum sitmiad hac. Cras a vestibulum a varius adipiscing ut digni...
Collar brings back coffee brewing ritual
Adipiscing hac imperdiet id blandit varius scelerisque at sagittis libero dui dis volutpat vehicula mus sed ut. Lacinia dui rutrum...
Reinterprets the classic bookshelf
Aliquet parturient scele risque scele risque nibh pretium parturient suspendisse platea sapien torquent feugiat parturient hac ame...
Creative water features and exterior
Ac haca ullamcorper donec ante habi tasse donec imperdiet eturpis varius per a augue magna hac. Nec hac et vestibulum duis a tinci...

MODEL HF-250 CT
MODEL HF-250 CT WITHOUT BIPOLAR
General Information:
Surgical Diathermy Unit HF-450CT is one of the best quality and we intend to export the diathermy units to africa, Diathermy units in Asia, and Diathermy units in Europe. It is also pertinent to notice that these Diathermy units also known has Electro Surgical Units are ISO 2001 Certified which meets the requirement of the most countries.
Electro surgical diathermy uses high-frequency electric current to heat and cut through tissue. The electric current is delivered to the surgical site through a specialized tool called an electrosurgical unit (ESU). The ESU is controlled by a surgeon or a surgical assistant, who adjusts the level of the current, frequency, and duration of the pulses according to the surgical task at hand.
Electrosurgical diathermy (ESD) is a surgical technique that uses an electric current to cut, coagulate, or cauterize tissue during surgery. It is a popular method in modern surgery due to its precision and efficiency. Here is some general information, uses, kinds, applications, accessories, and end notes related to electro surgical diathermy.