AGSS Medical Air Plant – British Standard
AGSS Medical Air Plant – British Standard
Precision UK’s CPX AGSS Medical Air Plant – British Standard is manufactured under BS EN 13485 Medical Devices: Quality Management Systems. It provides a centralized or dedicated source for the safe removal of exhaled anaesthetic gases from within the theater, available in simplex and duplex pump configurations dependent on individual requirement.
For more information about the product, questions, queries and quotations please call us at +92-322-4602203 or Email us info@zirarenterprises.com, zirarenterprises@gmail.com
Technical Specification:
- HTM 02-01: Medical Gas Pipeline Systems
- C11 NHS: Model Engineering Specification – Medical Gases
- BS EN 6834: Specification for Active Anaesthetic Gas Scavenging Systems
- ISO 7396-2: Anaesthetic Gas Scavenging Disposal Systems
- CPX® branded solid British design
- Control and highly visible indication panel
- CE marked under Medical Device Directive 93/42/EEC with approval from British Standards Institute CE0086 classified as Class IIa Medical Device
- All interconnecting pipework is included
- Copper stubbed outlet and inlet pipework for ease of connecting to MGPS
- Available in Single or 3 Phase
- Anti-vibration mounts on all pumps
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Pre-set vacuum relief valve and low pressure sensors
- Low voltage (24V) remote switches
- Visible condensate drain flask fitted to exhaust
- Easy to install 4 wire + earth remote switch wiring
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
Description
AGSS Medical Air Plant – British Standard
Precision UK’s CPX AGSS Medical Air Plant – British Standard is manufactured under BS EN 13485 Medical Devices: Quality Management Systems. It provides a centralized or dedicated source for the safe removal of exhaled anaesthetic gases from within the theater, available in simplex and duplex pump configurations dependent on individual requirement.
For more information about the product, questions, queries and quotations please call us at +92-322-4602203 or Email us info@zirarenterprises.com, zirarenterprises@gmail.com
Technical Specification:
- HTM 02-01: Medical Gas Pipeline Systems
- C11 NHS: Model Engineering Specification – Medical Gases
- BS EN 6834: Specification for Active Anaesthetic Gas Scavenging Systems
- ISO 7396-2: Anaesthetic Gas Scavenging Disposal Systems
- CPX® branded solid British design
- Control and highly visible indication panel
- CE marked under Medical Device Directive 93/42/EEC with approval from British Standards Institute CE0086 classified as Class IIa Medical Device
- All interconnecting pipework is included
- Copper stubbed outlet and inlet pipework for ease of connecting to MGPS
- Available in Single or 3 Phase
- Anti-vibration mounts on all pumps
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Pre-set vacuum relief valve and low pressure sensors
- Low voltage (24V) remote switches
- Visible condensate drain flask fitted to exhaust
- Easy to install 4 wire + earth remote switch wiring
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Degreased Medical Gas Copper Fittings
Degreased Medical Gas Copper Fittings
Degreased Medical Gas Copper Fittings CPX end feed copper fittings a.k.a Degreased Medical Gas Copper Fittings are manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. They are suitable for jointing degreased medical gas copper tube pipelines compliant to BS EN 13348, BS EN 1057 and BS 2871 Part 1 Table X as quoted in HTM 02-01 and C11. Exclusively designed for Medical Gas Pipeline Systems (MGPS), CPX copper fittings recognize and embrace the specialist requirements of the medical gas pipeline industry to include all aspects of design, cleanliness, packaging and usability required to become a successful partner for installations of pipelines compliant with HTM 02-01, C11 and BS EN 7396. Specification: -- All CPX degreased copper fittings are engraved with the following information: EN 1254, size, manufacturer details.
- Each fitting is individually bagged in a clear protective polythene bag and sealed to maintain cleanliness
- Each bag is labelled with the degreased specification, product code and production batch number.
- Cleanliness is guaranteed below 0.01 mg/cm² of hydrocarbons on the degreased surface of the fitting.
- All boxes include logical and concise labeling identification.
- 25 Year guarantee.
- Available in all sizes
Designing Planning of Central Supply Medical Gases
Designing Planning of Central Supply Medical Gases
For Designing Planning of Central Supply Medical Gases.we design and plan the latest 3D drawings using auto-cad. Our designing department communicate with our potential clients and provides best design and plan as per the discretion of our customers. which is also compatible with the dimensions of their premise. We have a lot to tell you. Please contact us for more information 0322-4602203
Hermetic Doors
Hermetic Doors
Hermetic Doors also known as Hermetic sliding door or automatic doors are required where hygiene and the leakage of air control is critical. These doors takes less space and sealed completely form the edges so no air, gases or dust particles can pass through out of the operation theater. We have best team in market to install these doors with top quality material at very competitive prices. For further queries feel free to contact us 0322-4602203
Liquid Oxygen Tanks and Generators
Liquid Oxygen Tanks and Generators
Precision UK’s Liquid Oxygen Tanks and Generators and Cryogenic Bulk Tanks can be used for a variety of applications and are part of the high performance CPX LOX range. LOX Tanks are stationary, vacuum-insulated pressure vessels for storage of cryogenic liquefied gases. Low evaporation rate, ergonomic layout of instruments and controls for ease of use, carefully selected components and outstanding build quality ensure a high degree of reliability and economy in everyday use and guarantee the longevity of the vessel. Vessels are available in vertical or horizontal configurations, sized from 2,200 to 200,000 litres, and are manufactured and tested according to the European Pressure Equipment Directive 97/23 CE (PED) or to the regulations of other countries. VIE Control Panels available 500l/min-6000l/min. (Please contact sales office for further details.) Click here for oxygen generators price in Pakistan Our vessels have been in use world-wide for decades. High quality is ensured by measures, including a quality management system complying to ISO 9001.
Oxygen Generators
- The Precision UK, CPX Oxygen Generating Plant provides a centralized source of Oxygen up to 95% +/- 3% purity available in a variety of configurations.
- The stations are readily equipped with O2 analyzers, complete with an Alarm to ensure the produced purity of the O2 is controlled and not less than the programmed parameter.
- Digital Touchscreen controls with factory preset configuration shall incorporate; Pictorial easy to read images, O2 concentration %, Receiver pressure, Oxygen Capacity, Operating Instructions and Manual. *Bespoke design service available.
- Oxygen Generators are available in customer specific requirements. Our standard ranges are 100l/min – 2000l/min.
- Manufactured in our UK factory, fully tested and ready to install our generator is CE marked and is in standards compliance with ISO 10083 and conforms to HTM and EN Standards.
See our Oxygen Generator Plant in Pakistan Ready Stock
https://youtu.be/r1rRwTwuiTM General Information:- When we talk about oxygen generators price in Pakistan and oxygen refilling in Pakistan there are a lot of thoughts come into one's mind that oxygen refilling or Oxygen Generators usage is not possible and it required some sort of space science. well that's not the case here. Zirar Enterprises are one of the leading company to install Oxygen Generators in Pakistan and the good thing about these generators are that hospitals and clinics do not required liquid storage tanks. The Oxygen Generators can generate the compressed oxygen and directly supply into hospital lines. For more information regarding prices, quotations or any other queries please feel free to contact us at zirarenterprises@gmaail.com, info@zirarenterprises.com, +92-322-4602203
Medical Gas Outlets British Standard
Medical Gas Outlets British Standard
Medical Gas Outlets British Standard are installed at medical gas systems delivery points. The base part made of brass alloy. Twice outlet connection. With shut-off valve can maintain without having to interrupt gas delivery to other outlets. Only accept British standard (BS) quick connect adapters. Different gas type with different quick connect adapters. Outlets available Wall mounting, Bed Head mounting and Pendant mounting. Manufactured by AMCAREMED Medical Gas Outlets Specification:-- Completely with EN ISO 9170-1, EN ISO 9170-2 , HTM 02-01 standard.
- Gas Type: O2, AIR,VAC, N2O, N2, CO2 are available
- O.D. 10 mm copper pipeline
- ISO32 color-coded for easy gas identification
- 100% tested for flow, leaks and cleaned
- Wall mounting, Bed Head mounting and Pendant mounting available
Medical Pendants – Rigid Precision UK
Medical Pendants - Rigid Precision UK
Medical Pendants - Rigid Precision UK is a Rigid and Retractable Pendants are manufactured under BS EN 13485 Medical Devices: Quality Management Systems. They are intended to distribute medical gases, AGSS and electrical services to the operating table/anesthetic machine, whilst leaving the surrounding area free from trailing hoses and cables. Rigid Pendants are ceiling mounted fixed columns complete with first fix plate and ceiling shroud, with an epoxy powder coated finish. Retractable Pendants are ceiling mounted, height adjustable columns complete with first fix plate and ceiling shroud, with an epoxy powder coated finish. The height to the underside of the pendant can be adjusted throughout a 300 mm Predetermined range. A maximum of 9 medical gas and AGSS terminal units, complete with hose assemblies, can be accommodated within each pendant. Each pendant can accommodate a maximum of 8 electrical sockets. Other specialist outlets such as data sockets, equipotential sockets, etc. can be incorporated into the pendant as required.Designed to meet the requirements of: Medical Pendants - Rigid Precision UK
Please click to see our complete range of Medical Gases & Infrastructure- HTM 02-01: Health Technical Memorandum Medical Gas Pipeline Systems
- BS EN 7396: Medical Gas Pipelines for Compressed Medical Gases and Vacuum
- BS EN ISO 11197: Medical Supply Units
- BS EN 18082: Non-interchangeable Screw Threaded (NIST) Low-pressure Connectors for Medical Gases
- BS EN 9170: Terminal Units for use with Compressed Medical Gases and Vacuum
- Medical Device Directive 93/42/EEC (CE0086) Medical Device Class IIb.
Reviews
There are no reviews yet.