Liquid Oxygen Tanks and Generators
Liquid Oxygen Tanks and Generators
Precision UK’s Liquid Oxygen Tanks and Generators and Cryogenic Bulk Tanks can be used for a variety of applications and are part of the high performance CPX LOX range.
LOX Tanks are stationary, vacuum-insulated pressure vessels for storage of cryogenic liquefied gases. Low evaporation rate, ergonomic layout of instruments and controls for ease of use, carefully selected components and outstanding build quality ensure a high degree of reliability and economy in everyday use and guarantee the longevity of the vessel.
Vessels are available in vertical or horizontal configurations, sized from 2,200 to 200,000 litres, and are manufactured and tested according to the European Pressure Equipment Directive 97/23 CE (PED) or to the regulations of other countries.
VIE Control Panels available 500l/min-6000l/min. (Please contact sales office for further details.)
Click here for oxygen generators price in Pakistan
Our vessels have been in use world-wide for decades. High quality is ensured by measures, including a quality management system complying to ISO 9001.
Oxygen Generators
- The Precision UK, CPX Oxygen Generating Plant provides a centralized source of Oxygen up to 95% +/- 3% purity available in a variety of configurations.
- The stations are readily equipped with O2 analyzers, complete with an Alarm to ensure the produced purity of the O2 is controlled and not less than the programmed parameter.
- Digital Touchscreen controls with factory preset configuration shall incorporate; Pictorial easy to read images, O2 concentration %, Receiver pressure, Oxygen Capacity, Operating Instructions and Manual. *Bespoke design service available.
- Oxygen Generators are available in customer specific requirements. Our standard ranges are 100l/min – 2000l/min.
- Manufactured in our UK factory, fully tested and ready to install our generator is CE marked and is in standards compliance with ISO 10083 and conforms to HTM and EN Standards.
See our Oxygen Generator Plant in Pakistan Ready Stock
https://youtu.be/r1rRwTwuiTM
General Information:-
When we talk about oxygen generators price in Pakistan and oxygen refilling in Pakistan there are a lot of thoughts come into one’s mind that oxygen refilling or Oxygen Generators usage is not possible and it required some sort of space science. well that’s not the case here. Zirar Enterprises are one of the leading company to install Oxygen Generators in Pakistan and the good thing about these generators are that hospitals and clinics do not required liquid storage tanks. The Oxygen Generators can generate the compressed oxygen and directly supply into hospital lines.
For more information regarding prices, quotations or any other queries please feel free to contact us at zirarenterprises@gmaail.com, info@zirarenterprises.com, +92-322-4602203
Liquid Oxygen Tanks and Generators
Precision UK’s Liquid Oxygen Tanks and Generators and Cryogenic Bulk Tanks can be used for a variety of applications and are part of the high performance CPX LOX range.
LOX Tanks are stationary, vacuum-insulated pressure vessels for storage of cryogenic liquefied gases. Low evaporation rate, ergonomic layout of instruments and controls for ease of use, carefully selected components and outstanding build quality ensure a high degree of reliability and economy in everyday use and guarantee the longevity of the vessel.
Vessels are available in vertical or horizontal configurations, sized from 2,200 to 200,000 litres, and are manufactured and tested according to the European Pressure Equipment Directive 97/23 CE (PED) or to the regulations of other countries.
VIE Control Panels available 500l/min-6000l/min. (Please contact sales office for further details.)
Click here for oxygen generators price in Pakistan
Our vessels have been in use world-wide for decades. High quality is ensured by measures, including a quality management system complying to ISO 9001.
Oxygen Generators
- The Precision UK, CPX Oxygen Generating Plant provides a centralized source of Oxygen up to 95% +/- 3% purity available in a variety of configurations.
- The stations are readily equipped with O2 analyzers, complete with an Alarm to ensure the produced purity of the O2 is controlled and not less than the programmed parameter.
- Digital Touchscreen controls with factory preset configuration shall incorporate; Pictorial easy to read images, O2 concentration %, Receiver pressure, Oxygen Capacity, Operating Instructions and Manual. *Bespoke design service available.
- Oxygen Generators are available in customer specific requirements. Our standard ranges are 100l/min – 2000l/min.
- Manufactured in our UK factory, fully tested and ready to install our generator is CE marked and is in standards compliance with ISO 10083 and conforms to HTM and EN Standards.
See our Oxygen Generator Plant in Pakistan Ready Stock
https://youtu.be/r1rRwTwuiTM
General Information:-
When we talk about oxygen generators price in Pakistan and oxygen refilling in Pakistan there are a lot of thoughts come into one’s mind that oxygen refilling or Oxygen Generators usage is not possible and it required some sort of space science. well that’s not the case here. Zirar Enterprises are one of the leading company to install Oxygen Generators in Pakistan and the good thing about these generators are that hospitals and clinics do not required liquid storage tanks. The Oxygen Generators can generate the compressed oxygen and directly supply into hospital lines.
For more information regarding prices, quotations or any other queries please feel free to contact us at zirarenterprises@gmaail.com, info@zirarenterprises.com, +92-322-4602203
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
AGSS Medical Air Plant – British Standard
AGSS Medical Air Plant - British Standard
Precision UK’s CPX AGSS Medical Air Plant - British Standard is manufactured under BS EN 13485 Medical Devices: Quality Management Systems. It provides a centralized or dedicated source for the safe removal of exhaled anaesthetic gases from within the theater, available in simplex and duplex pump configurations dependent on individual requirement. For more information about the product, questions, queries and quotations please call us at +92-322-4602203 or Email us info@zirarenterprises.com, zirarenterprises@gmail.com Technical Specification:- HTM 02-01: Medical Gas Pipeline Systems
- C11 NHS: Model Engineering Specification – Medical Gases
- BS EN 6834: Specification for Active Anaesthetic Gas Scavenging Systems
- ISO 7396-2: Anaesthetic Gas Scavenging Disposal Systems
- CPX® branded solid British design
- Control and highly visible indication panel
- CE marked under Medical Device Directive 93/42/EEC with approval from British Standards Institute CE0086 classified as Class IIa Medical Device
- All interconnecting pipework is included
- Copper stubbed outlet and inlet pipework for ease of connecting to MGPS
- Available in Single or 3 Phase
- Anti-vibration mounts on all pumps
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Pre-set vacuum relief valve and low pressure sensors
- Low voltage (24V) remote switches
- Visible condensate drain flask fitted to exhaust
- Easy to install 4 wire + earth remote switch wiring
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
Degreased Medical Gas Copper Fittings
Degreased Medical Gas Copper Fittings
Degreased Medical Gas Copper Fittings CPX end feed copper fittings a.k.a Degreased Medical Gas Copper Fittings are manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. They are suitable for jointing degreased medical gas copper tube pipelines compliant to BS EN 13348, BS EN 1057 and BS 2871 Part 1 Table X as quoted in HTM 02-01 and C11. Exclusively designed for Medical Gas Pipeline Systems (MGPS), CPX copper fittings recognize and embrace the specialist requirements of the medical gas pipeline industry to include all aspects of design, cleanliness, packaging and usability required to become a successful partner for installations of pipelines compliant with HTM 02-01, C11 and BS EN 7396. Specification: -- All CPX degreased copper fittings are engraved with the following information: EN 1254, size, manufacturer details.
- Each fitting is individually bagged in a clear protective polythene bag and sealed to maintain cleanliness
- Each bag is labelled with the degreased specification, product code and production batch number.
- Cleanliness is guaranteed below 0.01 mg/cm² of hydrocarbons on the degreased surface of the fitting.
- All boxes include logical and concise labeling identification.
- 25 Year guarantee.
- Available in all sizes
Designing and planning of ICU
Designing and planning of ICU
For Designing and planning of ICU. We have one best expertise in designing and planning of intensive care unit (ICU) we have ample experience in this category. We already manufactured and installed it to one of the best and renowned hospitals nation wide for more information please contact 0322-4602203
Designing Planning of Central Supply Medical Gases
Designing Planning of Central Supply Medical Gases
For Designing Planning of Central Supply Medical Gases.we design and plan the latest 3D drawings using auto-cad. Our designing department communicate with our potential clients and provides best design and plan as per the discretion of our customers. which is also compatible with the dimensions of their premise. We have a lot to tell you. Please contact us for more information 0322-4602203
Medical Gas Outlets Precision UK
Medical Gas Outlets Precision UK
Medical Gas Outlets Precision UK also known as CPX Terminal Units are designed and manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. The units comprise of a first fix, second fix and a second fix valve assembly and connect medical appliances to the gas supply system. Please also see our Medical Gas Outlets Precision UK & Medical Gases & Infrastructure The first fix comprises of a brass pipeline termination cylinder with a 12mm BS EN 13348 copper pipe for brazing to the fixed pipeline system, or with a NIST BS EN 18082 (non-interchangeable screw thread) connector for connection to a hose assembly. A mounting box suitable for both surface and flush installations is also provided. CPX British Standard and DIN Standard Gas Outlets utilize a common first fix assembly. The CPX Terminal Unit is designed to enable gas probes to be connected and disconnected easily and with minimal effort and the same time as giving a strong, reliable and secure connection. They are available for oxygen, nitrous oxide, 50% oxygen/50% nitrous oxide mixture, medical air, surgical air, medical vacuum, carbon dioxide, nitrogen and AGSS. The terminal units can be flexibly integrated into any type of installation including surface, flush, bedhead and pendant and are supplied with a 3 year warranty. Test plugs are included with flush, surface, and bedhead types for first fix pressure testing on site. DIN Standard CPX DIN gas outlets are manufactured and designed in our UK factory, full metal construction, Gas Indexing as EN 13260-2, EN 9170 and Medical Gas Pipelines EN 7396.
Standards: Designed to Meet the requirements of
Medical Gas Outlet Precision UK
- HTM 02-01 Medical gas Pipeline Systems
- BS EN 7396-1 Pipelines for Compressed medical Gases and Vacuum
- BS EN 7396-2 Anaesthetic Gas Scavenging Disposal Systems
- BS EN 9170-1 Terminal Units for use with Compressed Medical Gases and Vacuum
- BS EN 9170-2 Terminal Units for Anaesthetic Gas Scavenging Systems
- C11 NHS Model Engineering Specification – Medical Gases
- BS EN 18082 Non-interchangeable Screw Threaded (NIST) Low-pressure Connectors for Medical Gases
- BS 5682 Specification for Probes Specification for Probes (quick connectors) for Medical Gases.
- Medical Device Directive 93/42/EEC (CE0086) Class IIb.
- DIN 13260-2 Part 2: Dimensions and allocation of Probes and Gas specific connection points for Terminal Units
- Available for Oxygen, Nitrous Oxide, Medical Air, CO2, Motor Air and Vacuum (other gases available on request)
- Incorporating a 12mm copper stub pipe to EN 13348 to allow easy connection to the Medical Gas Pipeline system, other options include NIST or DISS type fittings for pendants or bed head units.
- Probe insertion design incorporates parking position and full insert for 100% operation, each outlet is supplied with Flush/Surface Box or Bed Head Plate mounting options and include a 3-year warranty.
- CE marked CE0086 Class IIb Medical Device.
Reviews
There are no reviews yet.