Liquid Oxygen Tanks and Generators
Liquid Oxygen Tanks and Generators
Precision UK’s Liquid Oxygen Tanks and Generators and Cryogenic Bulk Tanks can be used for a variety of applications and are part of the high performance CPX LOX range.
LOX Tanks are stationary, vacuum-insulated pressure vessels for storage of cryogenic liquefied gases. Low evaporation rate, ergonomic layout of instruments and controls for ease of use, carefully selected components and outstanding build quality ensure a high degree of reliability and economy in everyday use and guarantee the longevity of the vessel.
Vessels are available in vertical or horizontal configurations, sized from 2,200 to 200,000 litres, and are manufactured and tested according to the European Pressure Equipment Directive 97/23 CE (PED) or to the regulations of other countries.
VIE Control Panels available 500l/min-6000l/min. (Please contact sales office for further details.)
Click here for oxygen generators price in Pakistan
Our vessels have been in use world-wide for decades. High quality is ensured by measures, including a quality management system complying to ISO 9001.
Oxygen Generators
- The Precision UK, CPX Oxygen Generating Plant provides a centralized source of Oxygen up to 95% +/- 3% purity available in a variety of configurations.
- The stations are readily equipped with O2 analyzers, complete with an Alarm to ensure the produced purity of the O2 is controlled and not less than the programmed parameter.
- Digital Touchscreen controls with factory preset configuration shall incorporate; Pictorial easy to read images, O2 concentration %, Receiver pressure, Oxygen Capacity, Operating Instructions and Manual. *Bespoke design service available.
- Oxygen Generators are available in customer specific requirements. Our standard ranges are 100l/min – 2000l/min.
- Manufactured in our UK factory, fully tested and ready to install our generator is CE marked and is in standards compliance with ISO 10083 and conforms to HTM and EN Standards.
See our Oxygen Generator Plant in Pakistan Ready Stock
https://youtu.be/r1rRwTwuiTM
General Information:-
When we talk about oxygen generators price in Pakistan and oxygen refilling in Pakistan there are a lot of thoughts come into one’s mind that oxygen refilling or Oxygen Generators usage is not possible and it required some sort of space science. well that’s not the case here. Zirar Enterprises are one of the leading company to install Oxygen Generators in Pakistan and the good thing about these generators are that hospitals and clinics do not required liquid storage tanks. The Oxygen Generators can generate the compressed oxygen and directly supply into hospital lines.
For more information regarding prices, quotations or any other queries please feel free to contact us at zirarenterprises@gmaail.com, info@zirarenterprises.com, +92-322-4602203
Liquid Oxygen Tanks and Generators
Precision UK’s Liquid Oxygen Tanks and Generators and Cryogenic Bulk Tanks can be used for a variety of applications and are part of the high performance CPX LOX range.
LOX Tanks are stationary, vacuum-insulated pressure vessels for storage of cryogenic liquefied gases. Low evaporation rate, ergonomic layout of instruments and controls for ease of use, carefully selected components and outstanding build quality ensure a high degree of reliability and economy in everyday use and guarantee the longevity of the vessel.
Vessels are available in vertical or horizontal configurations, sized from 2,200 to 200,000 litres, and are manufactured and tested according to the European Pressure Equipment Directive 97/23 CE (PED) or to the regulations of other countries.
VIE Control Panels available 500l/min-6000l/min. (Please contact sales office for further details.)
Click here for oxygen generators price in Pakistan
Our vessels have been in use world-wide for decades. High quality is ensured by measures, including a quality management system complying to ISO 9001.
Oxygen Generators
- The Precision UK, CPX Oxygen Generating Plant provides a centralized source of Oxygen up to 95% +/- 3% purity available in a variety of configurations.
- The stations are readily equipped with O2 analyzers, complete with an Alarm to ensure the produced purity of the O2 is controlled and not less than the programmed parameter.
- Digital Touchscreen controls with factory preset configuration shall incorporate; Pictorial easy to read images, O2 concentration %, Receiver pressure, Oxygen Capacity, Operating Instructions and Manual. *Bespoke design service available.
- Oxygen Generators are available in customer specific requirements. Our standard ranges are 100l/min – 2000l/min.
- Manufactured in our UK factory, fully tested and ready to install our generator is CE marked and is in standards compliance with ISO 10083 and conforms to HTM and EN Standards.
See our Oxygen Generator Plant in Pakistan Ready Stock
https://youtu.be/r1rRwTwuiTM
General Information:-
When we talk about oxygen generators price in Pakistan and oxygen refilling in Pakistan there are a lot of thoughts come into one’s mind that oxygen refilling or Oxygen Generators usage is not possible and it required some sort of space science. well that’s not the case here. Zirar Enterprises are one of the leading company to install Oxygen Generators in Pakistan and the good thing about these generators are that hospitals and clinics do not required liquid storage tanks. The Oxygen Generators can generate the compressed oxygen and directly supply into hospital lines.
For more information regarding prices, quotations or any other queries please feel free to contact us at zirarenterprises@gmaail.com, info@zirarenterprises.com, +92-322-4602203
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
AGSS Medical Air Plant – British Standard
AGSS Medical Air Plant - British Standard
Precision UK’s CPX AGSS Medical Air Plant - British Standard is manufactured under BS EN 13485 Medical Devices: Quality Management Systems. It provides a centralized or dedicated source for the safe removal of exhaled anaesthetic gases from within the theater, available in simplex and duplex pump configurations dependent on individual requirement. For more information about the product, questions, queries and quotations please call us at +92-322-4602203 or Email us info@zirarenterprises.com, zirarenterprises@gmail.com Technical Specification:- HTM 02-01: Medical Gas Pipeline Systems
- C11 NHS: Model Engineering Specification – Medical Gases
- BS EN 6834: Specification for Active Anaesthetic Gas Scavenging Systems
- ISO 7396-2: Anaesthetic Gas Scavenging Disposal Systems
- CPX® branded solid British design
- Control and highly visible indication panel
- CE marked under Medical Device Directive 93/42/EEC with approval from British Standards Institute CE0086 classified as Class IIa Medical Device
- All interconnecting pipework is included
- Copper stubbed outlet and inlet pipework for ease of connecting to MGPS
- Available in Single or 3 Phase
- Anti-vibration mounts on all pumps
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Pre-set vacuum relief valve and low pressure sensors
- Low voltage (24V) remote switches
- Visible condensate drain flask fitted to exhaust
- Easy to install 4 wire + earth remote switch wiring
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
Bed Head Unit Horizontal
Bed Head Unit Horizontal
Bed Head Unit Horizontal widely used in hospitals and which provides patients a good care, backed by invisible medical gas copper pipe lines, electric sockets it is pertinent to notice that we at Zirar Enterprises have installed these units in many renowned hospitals. please feel free to contact us anytime for assistance +923224602203 If you want bed head unit vertical then click on this link bellow Bed Head unit vertical
Designing and planning of ICU
Designing and planning of ICU
For Designing and planning of ICU. We have one best expertise in designing and planning of intensive care unit (ICU) we have ample experience in this category. We already manufactured and installed it to one of the best and renowned hospitals nation wide for more information please contact 0322-4602203
Designing and Planning of Nursery
Designing and Planning of Nursery
Designing and Planning of Nursery in Hospital(s) nurseries are also very important infrastructure for the new born babies. We have ample experience in manufacturing, installing and importing the hospital nursery equipment. Our qualified staff is expert in manufacturing the whole pediatrics ward including all the equipment required therein. please contact for more information 0322-4602203
Manual/Semi Automatic Manifold Systems
Manual/Semi Automatic Manifold Systems
Manual/Semi Automatic Manifold Systems main using at small and medium hospitals. When using the medical gas oxygen manifold, several cylinders need to be connected to the manifold pipeline. The oxygen gas is first filtered and decompressed, and then transported through the main pipe to the end of use. The function of the secondary regulator is to stabilize the outlet gas flow of the main pipeline. CGA standard adapter port and inlet connection thread. Cleaned for medical Oxygen, Air, N2O, CO2 gas. Open type manifold connector cylinder number according to the client request. 3 years warranty. Specifications:- Applicable gas: O2, Air, CO2, N2, and N2O etc.
- High flow capacity regulator
- Open style cylinder number according to the client request
- Pass the pressurization testing, welded in silver, much safety and stable
- Wall mount simplifies installation, easy installed
- Size of the connecting hose is customized
- CGA4.1 and ISO15001 Standard
- Maximum pressure 3,000 psi
General Information:
An oxygen manifold system is a critical component in the delivery of oxygen in medical facilities. The system consists of a series of oxygen cylinders connected to a common manifold, which regulates the flow of oxygen to different parts of the hospital or clinic. The manifold system ensures a continuous supply of oxygen to patients, even if one cylinder runs out of gas. The manifold system is designed to be reliable and durable, and it is typically made of high-quality materials that can withstand the high pressures of oxygen gas. The manifold system can be configured in different ways depending on the specific needs of the medical facility. For example, some manifold systems may be designed to supply oxygen to a single ward or room, while others may supply oxygen to multiple floors of a hospital. One of the benefits of an oxygen manifold system is its ability to provide a centralized source of oxygen, which can reduce the need for multiple oxygen tanks scattered throughout a facility. This can make it easier to manage the inventory of oxygen tanks and reduce the risk of running out of oxygen during a medical emergency. Overall, an oxygen manifold system is an essential component of any medical facility that requires a reliable supply of oxygen for patient care. Proper maintenance and monitoring of the system are crucial to ensure its continued reliability and safety. Manufactured by AMCAREMED Please click to read Medical Gas and Pipeline Network For more information please feel free to call us at+92-322-4602203 or Email: info@ziarenterprises.com, zirarenterprises@gmail.com
Medical Air Plant – British Standard
Medical Air Plant - British Standard
Medical Air Plant - British Standard - Precision UK’s CPX Medical Air Plant is manufactured under BS EN 13485 Medical Devices: Quality Management Systems. It provides a centralized source of medical air, available in simplex to multi-pump configurations dependent on individual requirement.
Specification:
- Specific Benefits Include
- Fully complies to HTM 02-01, HTM 2022, C11, BS EN 7396, CE0086 Class IIb
- CE marked under Medical Device Directive 93/42/EEC
- CPX® branded solid British design
- Control and highly visible indication panel
- All interconnecting pipework is included
- Outlet pipework for connecting to the pipeline
- Anti-vibration mounts on all compressors
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Digital display touchscreen with user interface
- 400Kpa, 700Kpa and 1000Kpa output versions available
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
Medical Vacuum Plant British Standard
me British Standard
Precision UK’s CPX Medical Vacuum Plant British Standard is manufactured under BS EN 13485 Medical Devices: Quality Management Systems. It provides a centralized source of vacuum, available in simplex to multi-pump configurations dependent on individual requirement, to include complete package plant or modular format.
Specification: -
Specific Benefits Include
- Fully complies to HTM 02-01, HTM 2022, C11, BS EN 7396, CE0086 Class IIb
- CE marked under Medical Device Directive 93/42/EEC
- CPX® branded solid British design
- Control and highly visible indication panel
- All interconnecting pipework is included
- Outlet pipework for connecting to the pipeline
- Anti-vibration mounts on all pumps
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Digital display available on request
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
- Options – Touchscreen, BMS Modbus, Digital Outputs, SMS Texting Alarms, Service Reminders
Reviews
There are no reviews yet.