Liquid Oxygen Tanks and Generators
Liquid Oxygen Tanks and Generators
Precision UK’s Liquid Oxygen Tanks and Generators and Cryogenic Bulk Tanks can be used for a variety of applications and are part of the high performance CPX LOX range.
LOX Tanks are stationary, vacuum-insulated pressure vessels for storage of cryogenic liquefied gases. Low evaporation rate, ergonomic layout of instruments and controls for ease of use, carefully selected components and outstanding build quality ensure a high degree of reliability and economy in everyday use and guarantee the longevity of the vessel.
Vessels are available in vertical or horizontal configurations, sized from 2,200 to 200,000 litres, and are manufactured and tested according to the European Pressure Equipment Directive 97/23 CE (PED) or to the regulations of other countries.
VIE Control Panels available 500l/min-6000l/min. (Please contact sales office for further details.)
Click here for oxygen generators price in Pakistan
Our vessels have been in use world-wide for decades. High quality is ensured by measures, including a quality management system complying to ISO 9001.
Oxygen Generators
- The Precision UK, CPX Oxygen Generating Plant provides a centralized source of Oxygen up to 95% +/- 3% purity available in a variety of configurations.
- The stations are readily equipped with O2 analyzers, complete with an Alarm to ensure the produced purity of the O2 is controlled and not less than the programmed parameter.
- Digital Touchscreen controls with factory preset configuration shall incorporate; Pictorial easy to read images, O2 concentration %, Receiver pressure, Oxygen Capacity, Operating Instructions and Manual. *Bespoke design service available.
- Oxygen Generators are available in customer specific requirements. Our standard ranges are 100l/min – 2000l/min.
- Manufactured in our UK factory, fully tested and ready to install our generator is CE marked and is in standards compliance with ISO 10083 and conforms to HTM and EN Standards.
See our Oxygen Generator Plant in Pakistan Ready Stock
https://youtu.be/r1rRwTwuiTM
General Information:-
When we talk about oxygen generators price in Pakistan and oxygen refilling in Pakistan there are a lot of thoughts come into one’s mind that oxygen refilling or Oxygen Generators usage is not possible and it required some sort of space science. well that’s not the case here. Zirar Enterprises are one of the leading company to install Oxygen Generators in Pakistan and the good thing about these generators are that hospitals and clinics do not required liquid storage tanks. The Oxygen Generators can generate the compressed oxygen and directly supply into hospital lines.
For more information regarding prices, quotations or any other queries please feel free to contact us at zirarenterprises@gmaail.com, info@zirarenterprises.com, +92-322-4602203
Liquid Oxygen Tanks and Generators
Precision UK’s Liquid Oxygen Tanks and Generators and Cryogenic Bulk Tanks can be used for a variety of applications and are part of the high performance CPX LOX range.
LOX Tanks are stationary, vacuum-insulated pressure vessels for storage of cryogenic liquefied gases. Low evaporation rate, ergonomic layout of instruments and controls for ease of use, carefully selected components and outstanding build quality ensure a high degree of reliability and economy in everyday use and guarantee the longevity of the vessel.
Vessels are available in vertical or horizontal configurations, sized from 2,200 to 200,000 litres, and are manufactured and tested according to the European Pressure Equipment Directive 97/23 CE (PED) or to the regulations of other countries.
VIE Control Panels available 500l/min-6000l/min. (Please contact sales office for further details.)
Click here for oxygen generators price in Pakistan
Our vessels have been in use world-wide for decades. High quality is ensured by measures, including a quality management system complying to ISO 9001.
Oxygen Generators
- The Precision UK, CPX Oxygen Generating Plant provides a centralized source of Oxygen up to 95% +/- 3% purity available in a variety of configurations.
- The stations are readily equipped with O2 analyzers, complete with an Alarm to ensure the produced purity of the O2 is controlled and not less than the programmed parameter.
- Digital Touchscreen controls with factory preset configuration shall incorporate; Pictorial easy to read images, O2 concentration %, Receiver pressure, Oxygen Capacity, Operating Instructions and Manual. *Bespoke design service available.
- Oxygen Generators are available in customer specific requirements. Our standard ranges are 100l/min – 2000l/min.
- Manufactured in our UK factory, fully tested and ready to install our generator is CE marked and is in standards compliance with ISO 10083 and conforms to HTM and EN Standards.
See our Oxygen Generator Plant in Pakistan Ready Stock
https://youtu.be/r1rRwTwuiTM
General Information:-
When we talk about oxygen generators price in Pakistan and oxygen refilling in Pakistan there are a lot of thoughts come into one’s mind that oxygen refilling or Oxygen Generators usage is not possible and it required some sort of space science. well that’s not the case here. Zirar Enterprises are one of the leading company to install Oxygen Generators in Pakistan and the good thing about these generators are that hospitals and clinics do not required liquid storage tanks. The Oxygen Generators can generate the compressed oxygen and directly supply into hospital lines.
For more information regarding prices, quotations or any other queries please feel free to contact us at zirarenterprises@gmaail.com, info@zirarenterprises.com, +92-322-4602203
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Degreased Copper Tube British Standard
Degreased Copper Tube British Standard
Degreased Copper Tube British Standard is Precision UK’s CPX Degreased Copper Tube British Standard is manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. All tube is manufactured under strict quality control procedures to ISO 9001:2008. CPX tube is the only British manufactured tube that is CE marked as a class IIa Medical Device 93/42/EEC with notified body British Standards Institute under CE0086. It is suitable for jointing degreased medical gas copper fittings and other medical gas equipment compliant to BS EN 13348, BS EN 1057, BS 2871 Part 1 Table X, EN 7396 and HTM 02-01. CPX copper tube is designed for use in Medical Gas Pipeline System (MGPS) installations and incorporates the specialist requirement of the MGPS industry to include cleanliness, packaging and usability required to attain the levels of quality as stated particularly in HTM 02-01. Specification: -- Each pipe is cleaned to have a maximum carbon level 0.20mg/dm².
- Each pipe is individually end capped and bundled in sealed polythene bags to maintain cleanliness.
- Chemical composition CU.DHP to ISO 1190-1/CW024A to EN1412.
- All copper tube is manufactured under strict quality control procedures to ISO 9001 and CE marked under the Medical Device Directive 93/42/EEC (CE0086) Class IIa.
- BSI Kitemarked
- Batch numbering for traceability is included on all pipework.
- All copper tube from sizes 12mm through to 108mm are engraved/permanently ink marked with the following information: EN 13348, nominal dimensions, manufacturer details, part no., CE Mark, Medical Device Directive to 93/42/EEC, time and date of production.
- 25 year guarantee.
Designing and Planning of Dialysis unit
Designing and Planing of Dialysis Unit
Designing and Planing of Dialysis Unit in Kidney center is very important. We keep the record of all dialysis units and kidney centers so that we design, plan and manufacture the whole dialysis unit in very low prices for more information and specification please contact 0322-4602203
Designing and planning of ICU
Designing and planning of ICU
For Designing and planning of ICU. We have one best expertise in designing and planning of intensive care unit (ICU) we have ample experience in this category. We already manufactured and installed it to one of the best and renowned hospitals nation wide for more information please contact 0322-4602203
Designing and Planning of Nursery
Designing and Planning of Nursery
Designing and Planning of Nursery in Hospital(s) nurseries are also very important infrastructure for the new born babies. We have ample experience in manufacturing, installing and importing the hospital nursery equipment. Our qualified staff is expert in manufacturing the whole pediatrics ward including all the equipment required therein. please contact for more information 0322-4602203
Medical Gas Outlets Medikar
Medical Gas Outlets Medikar
Medical Gas Outlets Medikar Q-Click gas outlet to the hospital by the medical gas supply unit to connected copper pipe and brought to the patient are the end points. Probes inserted into the socket with the relevant gas check valves are opened and gas will start crossing. Valve opens and gas locking mechanism to suppress the transition and the probe is removed and cut. Gas outlet pipe of the Q-Click base, capsule type, the main body consists of three groups. Q-Click Gas Connectors BS 5682:1998, ISO 9170:2008, EN 737, ISO 9001:2000 and are designed according to the norms of MDD 93/42/EEC. Q-Click Gas outlet other than a standard capsule and a standard to ensure the transition of the main body is enough to change. Easy disassembly and reassembly capability. Maintenance and service is also very simple. Gas outlet in the patient rooms, emergency rooms are used and the maternity ward. Q-Click gas outlet BS 5682:1998, DIN EN 13 260 and 737-6 are manufactured according to the norms. Q-Click gas outlet completely metal aluminum and brass material is manufactured from a durable and sturdy structure. It is also noticeable that we have been supplying wall mounted Oxygen Points in Pakistan for more than two decades and therefore we have ample experience in installation of Oxygen Points or Oxygen Outlets, Air Outlets, Vacuum Outlets and Nitrous Oxide outlet points, we can install it directly on the wall or typically it install on the Bed Head Panel. We have wide range of stock of British Standard Outlet Points, Din Standard Outlet Points or any other type can also be manufactured on prior order. We also manufacture OT Pendants and the outlet for OT Pendants Double Arm and Single Arm and they are 100# Portable.
Manufactured by Medikar Turkey
Please click to see our full Range of Medical Gases & Infrastructure
For more information please feel free to contact us +92-322-4602203 Email: info@zirarenterprises.com, zirarenterprises@gmail.com 
Oxygen Suction Flowmeter Precision UK
Oxygen Suction Flowmeter Precision UK
Oxygen Suction Flowmeter Precision UK - The Precision CPX Bubble flow meter shall be supplied with connection probes to BS 5682, other country standards available e.g. DIN, NFPA, AFNOR, JIS, SS, ISO European Gas Specificity Flow meter’s shall be supplied with gas specific probes and only attach to the corresponding medical gas terminal unit, it accurately measures flow at 0-15Lpm even at variant inlet pressures. Accuracy is fulfilled within 10% to attain maximum efficiency for patient and environment. Each flow meter is calibrated at 50 psi inlet pressure Materials Flow meter shall be manufactured to EN 13220:1999 and ISO 15002:2008 and constructed from chromium-plated brass body, inner and external tube in crack resistant polycarbonate and stainless steel ball. Other pieces shall be in brass. Humidifier: Constructed from polycarbonate, Sterilisation should be conducted in an autoclave on a 25 min cycle at 121 ºC, 1.3 kPa (max. 40 times). Before sterilisation remove the tube and diffuser and consequently disposed. Quality: Manufactured under BS EN 13485 Medical Devices: Quality Management Systems and carries CE0086 Class IIb Medical Device certification. Warranty The flow meter shall have a two-year warranty, subject to the recommended minimum routine maintenance operations being carried out by correctly competent persons. For more information regarding rates, quotations, queries or any questions please feel free to contact us at +92-322-4602203 Email: zirarenterprises@gmail.com, info@zirarenterprises.com
Pressure Regulators and FlowMeter Schonn
Pressure Regulators and FlowMeter Schonn
Pressure Regulators and Flow Meter Schonn Germany pressure regulators and our flowmeters for applications other than oxygen therapy (presented in the specific section) The supply of all medical gases through measurement devices requires accuracy and experience in manufacturing and development, so we underline once more that all these devices are made n full compliance with European standards and technical regulations, as well as requirements of 93/42/EEC Directive and the approval criteria set by national and international certified bodes. The CE marking procedure s carried out according to the requirements of a complete EN ISO 13485 quality system. All regulators and flow meters are rigorously tested, both n flow-meter™ own quality-assurance laboratories and by independent validated laboratories, to ensure that the products meet all the requirements of the medical applications n any foreseeable therapeutic condition. Pressure regulators and flow meters are manufactured n full compliance of ISO 10524-1 and ISO 15002. The Schönn range of Oxygen Therapy equipment provides a seamless solution between your medical gas pipeline system (MGPS) and downstream patent suppler enabling a one stop provider for all your medical gas needs. Our high end devices provide the user with light weight, highly precise and accurate equipment, which allows clinical and nursing staff to be concerned about only one thing - the patent. SCHÖNN flow meters are robust and tactile, providing the user with a quality assurance further backed by our extended 2 year warranty. Our aesthetically pleasing equipment can be supplied with our range of Bedhead trunking, SCHÖNN or Global terminal units thus eliminating any concern over equipment compatibility. The SCHÖNN range of downstream equipment can be supplied to British BS, German DIN or French AFNOR and AGA norms as well as a few others, which are available upon request.Pressure Regulators and FlowMeter Schonn
Please see our complete range of Medical Gases & Infrastructure Features:- Oxygen Flowmeters are used to provide Oxygen to the patent from Medical Gas outlets through nasal cannula or mask by regulating flow rate and passing through a humidifier when required.
- Schönn Flow meters are specially designed for medical applications and are used with oxygen. Body of the Flow meter s made of chromium plated brass, which s the most hygienic material for use with oxygen.
- The scaled tube of the Flow meter s made of poly carbonate for high resistance to breakage and s autoclavable. It s graded between 1-15 Ipm.
- The Humidifier on the Flow meter can be sterilized at 150°C.
- Our Flow meters are available for direct connection to appropriate Terminal Unit, n compliance wth EN European Norms) BS ,DIN and AGA.
- Humidifying bottle is 200ml.
Reviews
There are no reviews yet.