Multiparameter Monitor MD905 Meditech
Multiparameter Monitor MD905 Meditech Touch screen,5.0 inch color TFT Screen,simple for operating, quickly & accurately measure the data; Build-in rechargeable Li-battery, up to 15 hours running time, Support AC and DC power; Adjustable audible and visual alarms, and sensor off alarm.
- Portable,compact, easy for carrying and operation
- Clear and bright colour 5.0 Inch TFT-LCD with touch screen and real time display
- Intelligent Measuring of ECG.NIBP.SpO2.PR.PLETH.TEMP
- Storage/Review trend data up to 129.6 hours and 3888 groups
- Storage ECG waveform,each section is 8 seconds, totally is 30 sections; NIBP,SPO2,pulse rate and TEMP data sheet review up to 100 groups; which can be printed via connecting BlueTooth printer
- Utility PC software package for long time monitoring,history data uploading/review/printing/storage.
- Uploading history data to PC for reviewing, storage or printing via connecting USB data line or BlueTooth wireless
- Audio and visual alarm Built-in rechargeable Li-ion battery, up to 15-hour power supply Back light can be adjusted freely
- To fulfill Communication function, please install the data viewer software in a PC equipped with a printer, and connect the monitor with the PC by an USB cable or BlueTooth wireless.
Input：3 /5Lead ECG cable standard AAMI cable connector
Lead Selection：I, II, III
Gain Selection：×1, ×2, ×4, ×8
Sweep Speed: 12.5 25 and 50 mm/s
Frequency Response: None filter: 0.05～100Hz (-3dB)
filter: 0.5～40Hz (-3dB)
Calibration Signal: 1mV square wave
Protection: Against electrosurgical interference and defibrillation
Measuring Range: 20 bpm～300 bpm
Renew Time: 1 time per beat
Accuracy: ±1 bpm
Alarm Mode: Audible and visual alarm
±3 %(70%～89%)unspecified (0%～69%)
Measuring and Alarm Range:20～300bpm
Mode: Manual Auto STAT
Measuring Interval in AUTO Mode: 1 2 3 5 10 15 20 30 45 60 (min)
Measuring Period in STAT Mode: 5 min
Cuff Pressure Range:0 mmHg～300mmHg
Pulse Rate Range: 30 bpm～250bpm
Measurement Rage: Adult 30 mmHg～255mmHg
Pediatric 30 mmHg～160mmHg
Pressure Resolution : 1mmHg
The SYSTOLIC and DIASTOLIC values measured using this device shall be equal to those measured by trained medical personnel using cuff and stethoscope.
The MEAN value measured using this device is equal to that measured using blood pressure measurement device.
Input: Body surface thermal-sensitive resistor temperature sensor
Measuring Range: 0℃～50℃
Storage and Review
Maximum Data Quantity: 3888 groups
Maximum Trend Time: Continuous 129.6 hours
Rechargeable battery 1700mAh~2000mAh.7.2V.
Charge time: 2hours
Work Operation/relative humidity：0～55℃/10～80%RH
Storage Operation/relative humidity：–20～60℃/10～90%RH
AC Power Adaptor
Input: 100～240VAC 50/60Hz 0.7A
Output: DC 5V 1.5A
Li-ion rechargeable battery 3.7V/7200mAH
Operating Time: 15 hours with full battery capacity.
(Condition: 25℃ NIBP working period is 15 minutes)
Recharge Time: 10 hours.
Transport and Storage: -25℃～85℃
Working:30% ～85 %
Transport and Storage: 30% ～95 % (no condensation)
Measurement Display: color TFT- LCD/touch screen
Power Supply Indicator: Dual-color LED (red/green)
Charging indicator: A green LED
Net Weight: 655g
Type: Thermal micro-printer
Printer Paper: 58 mm thermal paper Paper roll diameter 33mm
Interface: Bluetooth wireless interface
Recording Types: Real-time printing and review data printing