Oxygen Automatic Manifold
Oxygen Automatic Manifold
Oxygen Automatic Manifold is mainly suitable for continuous consumption of bottled oxygen hospital. In use, the number of or even dozens of oxygen cylinders are centrally connected to the manifold pipe. The gas is filtered, decompression and pressure stabilized, and transported to the use site. AmcareMed Medical Automatic Gas Manifold is fully automatic and has pressure regulators with LED Display. Pressure unit provides a bar, Mpa or psi for measurement conversion. The fully automatic manifold system monitors cylinder tank pressure electronically, automatically changes over to the secondary tank when the primary cylinder tank is depleted and eliminates the need to manually set a priority side. The solenoid valve technology allows us to eliminate the shuttle valve and it can be realized automatically switch do not need operator debugging. In the electrical system power state, it can maintain continuous supply medical gas. It’s economical and efficient for hospital medical gas pipeline system.
Our automatic gas manifold is divided according to the number of cylinders and configuration, with a variety of structural forms, 2 * 1 cylinder group, 2 * 2 cylinder group, 2 * 3 cylinder group, 2 * 4 cylinder group, 2 * 5 cylinder group for selection, but also according to user needs and environmental requirements for special configuration.
Specification:
- LED Display full automatic manifold
- Closed box without interference
- Stainless steel diaphragm reducer, better to control flow
- With alarm system and remote alarming
- Open design to meet requirements for expansion in future
- Sustainable supply and control circuit when the power failure
- Input: 15Mpa, output: 200m3/h,0.4-0.8Mpa
- Input/output signal: 4–20mA, 485 bus communication
- Wall or floor mounts available
- 100% pressure test, safe and reliable
Manufactured by AMCAREMED
Please see our complete range of Bed Head Units, Bed Head Unit Pendants, Medical Gas Pipeline Network
For more information regarding rates, prices and quotations please feel free to contact us +92-322-4602203 Email: info@zirarenterprises.com, zirarenterprises@gmail.com
Oxygen Automatic Manifold
Oxygen Automatic Manifold is mainly suitable for continuous consumption of bottled oxygen hospital. In use, the number of or even dozens of oxygen cylinders are centrally connected to the manifold pipe. The gas is filtered, decompression and pressure stabilized, and transported to the use site. AmcareMed Medical Automatic Gas Manifold is fully automatic and has pressure regulators with LED Display. Pressure unit provides a bar, Mpa or psi for measurement conversion. The fully automatic manifold system monitors cylinder tank pressure electronically, automatically changes over to the secondary tank when the primary cylinder tank is depleted and eliminates the need to manually set a priority side. The solenoid valve technology allows us to eliminate the shuttle valve and it can be realized automatically switch do not need operator debugging. In the electrical system power state, it can maintain continuous supply medical gas. It’s economical and efficient for hospital medical gas pipeline system.
Our automatic gas manifold is divided according to the number of cylinders and configuration, with a variety of structural forms, 2 * 1 cylinder group, 2 * 2 cylinder group, 2 * 3 cylinder group, 2 * 4 cylinder group, 2 * 5 cylinder group for selection, but also according to user needs and environmental requirements for special configuration.
Specification:
- LED Display full automatic manifold
- Closed box without interference
- Stainless steel diaphragm reducer, better to control flow
- With alarm system and remote alarming
- Open design to meet requirements for expansion in future
- Sustainable supply and control circuit when the power failure
- Input: 15Mpa, output: 200m3/h,0.4-0.8Mpa
- Input/output signal: 4–20mA, 485 bus communication
- Wall or floor mounts available
- 100% pressure test, safe and reliable
Manufactured by AMCAREMED
Please see our complete range of Bed Head Units, Bed Head Unit Pendants, Medical Gas Pipeline Network
For more information regarding rates, prices and quotations please feel free to contact us +92-322-4602203 Email: info@zirarenterprises.com, zirarenterprises@gmail.com
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Bed Head Unit Horizontal
Bed Head Unit Horizontal
Bed Head Unit Horizontal widely used in hospitals and which provides patients a good care, backed by invisible medical gas copper pipe lines, electric sockets it is pertinent to notice that we at Zirar Enterprises have installed these units in many renowned hospitals. please feel free to contact us anytime for assistance +923224602203 If you want bed head unit vertical then click on this link bellow Bed Head unit vertical
Bed Head Unit Precision UK
Bed Head Unit Precision UK
Bed Head Unit Precision UK - All Precision UK’s CPX Bed Head Units are manufactured under BS EN 13485 Medical Devices: Quality Management Systems. They are designed and built with a view to provide smooth lines, a stylish finish and pleasing aesthetics in order to blend into the room décor. The unit is in accordance with the British Department of Health Memorandum No 2015 (HTM 08-03). BUILT MATERIAL Built from individually heat treated extruded aluminium sections, the unit provides separate compartments for medical gases and electrical services. Furthermore, the gas compartment is ventilated to prevent a buildup of gas inside the unit. There are separate panels for low voltage (LV) and protective extra-low voltage (PELV) services. This allows access to the PELV section for servicing without having to isolate the LV circuits. MEDICAL GAS OUTLETS Medical gas outlets are located in an individual compartment which both this and the cover are completely insulated from electrical elements. Any number of medical gas outlets can be accommodated depending on the length of the unit. A provision for nurse call can be included, reading and room lights are also available to be pre-installed in the unit.Any number of electrical sockets can be accommodated depending upon the length of the unit. A complete choice of British/American/Euro US/German Schuko sockets are available. General Information: - Bed Head Unit in Pakistan or Bed Head Panel Price in Pakistan is one the most important and a must product for any hospital in Pakistan, Bed Head Units can be installed in ICU, CCU, Wards, Nurseries etc and it plays a very vital role in order to facilitate the Nursing Staff or Paramedics. We have wide range of Bed Head Panels or Bed Head Units in Pakistan. We provide manufacturing, installation and all type of services of Medical Gases, Manifolds, Oxygen Systems ETC. For more information regarding quotations, rates, prices and queries please feel free to contact us at +92-322-4602203 Email: zirarenterprises@gmail.com, info@zirarenterprises.com
Designing and Planning of Nursery
Designing and Planning of Nursery
Designing and Planning of Nursery in Hospital(s) nurseries are also very important infrastructure for the new born babies. We have ample experience in manufacturing, installing and importing the hospital nursery equipment. Our qualified staff is expert in manufacturing the whole pediatrics ward including all the equipment required therein. please contact for more information 0322-4602203
Hermetic Doors
Hermetic Doors
Hermetic Doors also known as Hermetic sliding door or automatic doors are required where hygiene and the leakage of air control is critical. These doors takes less space and sealed completely form the edges so no air, gases or dust particles can pass through out of the operation theater. We have best team in market to install these doors with top quality material at very competitive prices. For further queries feel free to contact us 0322-4602203
Liquid Oxygen Tanks and Generators
Liquid Oxygen Tanks and Generators
Precision UK’s Liquid Oxygen Tanks and Generators and Cryogenic Bulk Tanks can be used for a variety of applications and are part of the high performance CPX LOX range. LOX Tanks are stationary, vacuum-insulated pressure vessels for storage of cryogenic liquefied gases. Low evaporation rate, ergonomic layout of instruments and controls for ease of use, carefully selected components and outstanding build quality ensure a high degree of reliability and economy in everyday use and guarantee the longevity of the vessel. Vessels are available in vertical or horizontal configurations, sized from 2,200 to 200,000 litres, and are manufactured and tested according to the European Pressure Equipment Directive 97/23 CE (PED) or to the regulations of other countries. VIE Control Panels available 500l/min-6000l/min. (Please contact sales office for further details.) Click here for oxygen generators price in Pakistan Our vessels have been in use world-wide for decades. High quality is ensured by measures, including a quality management system complying to ISO 9001.
Oxygen Generators
- The Precision UK, CPX Oxygen Generating Plant provides a centralized source of Oxygen up to 95% +/- 3% purity available in a variety of configurations.
- The stations are readily equipped with O2 analyzers, complete with an Alarm to ensure the produced purity of the O2 is controlled and not less than the programmed parameter.
- Digital Touchscreen controls with factory preset configuration shall incorporate; Pictorial easy to read images, O2 concentration %, Receiver pressure, Oxygen Capacity, Operating Instructions and Manual. *Bespoke design service available.
- Oxygen Generators are available in customer specific requirements. Our standard ranges are 100l/min – 2000l/min.
- Manufactured in our UK factory, fully tested and ready to install our generator is CE marked and is in standards compliance with ISO 10083 and conforms to HTM and EN Standards.
See our Oxygen Generator Plant in Pakistan Ready Stock
https://youtu.be/r1rRwTwuiTM General Information:- When we talk about oxygen generators price in Pakistan and oxygen refilling in Pakistan there are a lot of thoughts come into one's mind that oxygen refilling or Oxygen Generators usage is not possible and it required some sort of space science. well that's not the case here. Zirar Enterprises are one of the leading company to install Oxygen Generators in Pakistan and the good thing about these generators are that hospitals and clinics do not required liquid storage tanks. The Oxygen Generators can generate the compressed oxygen and directly supply into hospital lines. For more information regarding prices, quotations or any other queries please feel free to contact us at zirarenterprises@gmaail.com, info@zirarenterprises.com, +92-322-4602203
Manual/Semi Automatic Manifold Systems
Manual/Semi Automatic Manifold Systems
Manual/Semi Automatic Manifold Systems main using at small and medium hospitals. When using the medical gas oxygen manifold, several cylinders need to be connected to the manifold pipeline. The oxygen gas is first filtered and decompressed, and then transported through the main pipe to the end of use. The function of the secondary regulator is to stabilize the outlet gas flow of the main pipeline. CGA standard adapter port and inlet connection thread. Cleaned for medical Oxygen, Air, N2O, CO2 gas. Open type manifold connector cylinder number according to the client request. 3 years warranty. Specifications:- Applicable gas: O2, Air, CO2, N2, and N2O etc.
- High flow capacity regulator
- Open style cylinder number according to the client request
- Pass the pressurization testing, welded in silver, much safety and stable
- Wall mount simplifies installation, easy installed
- Size of the connecting hose is customized
- CGA4.1 and ISO15001 Standard
- Maximum pressure 3,000 psi
General Information:
An oxygen manifold system is a critical component in the delivery of oxygen in medical facilities. The system consists of a series of oxygen cylinders connected to a common manifold, which regulates the flow of oxygen to different parts of the hospital or clinic. The manifold system ensures a continuous supply of oxygen to patients, even if one cylinder runs out of gas. The manifold system is designed to be reliable and durable, and it is typically made of high-quality materials that can withstand the high pressures of oxygen gas. The manifold system can be configured in different ways depending on the specific needs of the medical facility. For example, some manifold systems may be designed to supply oxygen to a single ward or room, while others may supply oxygen to multiple floors of a hospital. One of the benefits of an oxygen manifold system is its ability to provide a centralized source of oxygen, which can reduce the need for multiple oxygen tanks scattered throughout a facility. This can make it easier to manage the inventory of oxygen tanks and reduce the risk of running out of oxygen during a medical emergency. Overall, an oxygen manifold system is an essential component of any medical facility that requires a reliable supply of oxygen for patient care. Proper maintenance and monitoring of the system are crucial to ensure its continued reliability and safety. Manufactured by AMCAREMED Please click to read Medical Gas and Pipeline Network For more information please feel free to call us at+92-322-4602203 or Email: info@ziarenterprises.com, zirarenterprises@gmail.com
Medical Gas Outlets Medikar
Medical Gas Outlets Medikar
Medical Gas Outlets Medikar Q-Click gas outlet to the hospital by the medical gas supply unit to connected copper pipe and brought to the patient are the end points. Probes inserted into the socket with the relevant gas check valves are opened and gas will start crossing. Valve opens and gas locking mechanism to suppress the transition and the probe is removed and cut. Gas outlet pipe of the Q-Click base, capsule type, the main body consists of three groups. Q-Click Gas Connectors BS 5682:1998, ISO 9170:2008, EN 737, ISO 9001:2000 and are designed according to the norms of MDD 93/42/EEC. Q-Click Gas outlet other than a standard capsule and a standard to ensure the transition of the main body is enough to change. Easy disassembly and reassembly capability. Maintenance and service is also very simple. Gas outlet in the patient rooms, emergency rooms are used and the maternity ward. Q-Click gas outlet BS 5682:1998, DIN EN 13 260 and 737-6 are manufactured according to the norms. Q-Click gas outlet completely metal aluminum and brass material is manufactured from a durable and sturdy structure. It is also noticeable that we have been supplying wall mounted Oxygen Points in Pakistan for more than two decades and therefore we have ample experience in installation of Oxygen Points or Oxygen Outlets, Air Outlets, Vacuum Outlets and Nitrous Oxide outlet points, we can install it directly on the wall or typically it install on the Bed Head Panel. We have wide range of stock of British Standard Outlet Points, Din Standard Outlet Points or any other type can also be manufactured on prior order. We also manufacture OT Pendants and the outlet for OT Pendants Double Arm and Single Arm and they are 100# Portable.
Manufactured by Medikar Turkey
Please click to see our full Range of Medical Gases & Infrastructure
For more information please feel free to contact us +92-322-4602203 Email: info@zirarenterprises.com, zirarenterprises@gmail.com 
Reviews
There are no reviews yet.