Oxygen Automatic Manifold
Oxygen Automatic Manifold
Oxygen Automatic Manifold is mainly suitable for continuous consumption of bottled oxygen hospital. In use, the number of or even dozens of oxygen cylinders are centrally connected to the manifold pipe. The gas is filtered, decompression and pressure stabilized, and transported to the use site. AmcareMed Medical Automatic Gas Manifold is fully automatic and has pressure regulators with LED Display. Pressure unit provides a bar, Mpa or psi for measurement conversion. The fully automatic manifold system monitors cylinder tank pressure electronically, automatically changes over to the secondary tank when the primary cylinder tank is depleted and eliminates the need to manually set a priority side. The solenoid valve technology allows us to eliminate the shuttle valve and it can be realized automatically switch do not need operator debugging. In the electrical system power state, it can maintain continuous supply medical gas. It’s economical and efficient for hospital medical gas pipeline system.
Our automatic gas manifold is divided according to the number of cylinders and configuration, with a variety of structural forms, 2 * 1 cylinder group, 2 * 2 cylinder group, 2 * 3 cylinder group, 2 * 4 cylinder group, 2 * 5 cylinder group for selection, but also according to user needs and environmental requirements for special configuration.
Specification:
- LED Display full automatic manifold
- Closed box without interference
- Stainless steel diaphragm reducer, better to control flow
- With alarm system and remote alarming
- Open design to meet requirements for expansion in future
- Sustainable supply and control circuit when the power failure
- Input: 15Mpa, output: 200m3/h,0.4-0.8Mpa
- Input/output signal: 4–20mA, 485 bus communication
- Wall or floor mounts available
- 100% pressure test, safe and reliable
Manufactured by AMCAREMED
Please see our complete range of Bed Head Units, Bed Head Unit Pendants, Medical Gas Pipeline Network
For more information regarding rates, prices and quotations please feel free to contact us +92-322-4602203 Email: info@zirarenterprises.com, zirarenterprises@gmail.com
Oxygen Automatic Manifold
Oxygen Automatic Manifold is mainly suitable for continuous consumption of bottled oxygen hospital. In use, the number of or even dozens of oxygen cylinders are centrally connected to the manifold pipe. The gas is filtered, decompression and pressure stabilized, and transported to the use site. AmcareMed Medical Automatic Gas Manifold is fully automatic and has pressure regulators with LED Display. Pressure unit provides a bar, Mpa or psi for measurement conversion. The fully automatic manifold system monitors cylinder tank pressure electronically, automatically changes over to the secondary tank when the primary cylinder tank is depleted and eliminates the need to manually set a priority side. The solenoid valve technology allows us to eliminate the shuttle valve and it can be realized automatically switch do not need operator debugging. In the electrical system power state, it can maintain continuous supply medical gas. It’s economical and efficient for hospital medical gas pipeline system.
Our automatic gas manifold is divided according to the number of cylinders and configuration, with a variety of structural forms, 2 * 1 cylinder group, 2 * 2 cylinder group, 2 * 3 cylinder group, 2 * 4 cylinder group, 2 * 5 cylinder group for selection, but also according to user needs and environmental requirements for special configuration.
Specification:
- LED Display full automatic manifold
- Closed box without interference
- Stainless steel diaphragm reducer, better to control flow
- With alarm system and remote alarming
- Open design to meet requirements for expansion in future
- Sustainable supply and control circuit when the power failure
- Input: 15Mpa, output: 200m3/h,0.4-0.8Mpa
- Input/output signal: 4–20mA, 485 bus communication
- Wall or floor mounts available
- 100% pressure test, safe and reliable
Manufactured by AMCAREMED
Please see our complete range of Bed Head Units, Bed Head Unit Pendants, Medical Gas Pipeline Network
For more information regarding rates, prices and quotations please feel free to contact us +92-322-4602203 Email: info@zirarenterprises.com, zirarenterprises@gmail.com
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Bed Head Unit Vertical
Bed Head Unit Vertical
Bed Head Unit Vertical is our specialty we at Zirar Enterprises install, assemble, fabricate and manufacture Bed Head Unit Vertical types and their composition are additionally extreme basic piece of the clinics, hospitals etc and it not only facilitate patients but also gives accommodation to the paramedic and nursing staff for better vertical view and to perform their life saving duties. Further essential advantage of vertical bed head unit is that it covers less space as compared to horizontal bed head units. Our specialized staff is totally all around, prepared and well taught in this specific field. please feel free to contact us anytime, we shall be glad to pay free visit, testing and commissioning. For post view click on this link Bed Head Vertical Technical Specification: - Material: Material is made of 99.9% pure aluminum, extruded from imported billet. Thickness: 2mm Size of Bed head unit: Standard size is 4 feet, but you can also customize as per your discretion. Paint: Jotun paint which is powdered coated, you can also choose paint of your choice. Color: Color can also be customize of customer's choice. Electrical Equipment: Clipsal, Australia. Electrical Accessories: 01 on and 01 off switch with 01 multi functional two pair of schuko sockets. Our valued clients can also modify it with their discretionary electrical accessories. Electrical Cables: For vertical bed head units we use one of the best electrical cables such as GM Cables, Newage Cables and Pakistan cables. However customer can also choose the cable brand as per their feasibility and budget. Patient Light: 600mm LED Light. Warranty: One year warrant with after sale service within a year, and 02 years paint warranty. Projects Completed:- Dow Medical University, Karachi
- Sheikh Zaid Hospital, Lahore
- Women Medical College, Islamabad
- Combined Military Hospital, Rawalpindi
- Ali Medical Complex, Islamabad
- Jinnah Hospital, Lahore
- Doctors Hospital, Lahore
- Omer Hospital, Lahore
- Rehman Medical Institute Peshawar
Degreased Copper Tube British Standard
Degreased Copper Tube British Standard
Degreased Copper Tube British Standard is Precision UK’s CPX Degreased Copper Tube British Standard is manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. All tube is manufactured under strict quality control procedures to ISO 9001:2008. CPX tube is the only British manufactured tube that is CE marked as a class IIa Medical Device 93/42/EEC with notified body British Standards Institute under CE0086. It is suitable for jointing degreased medical gas copper fittings and other medical gas equipment compliant to BS EN 13348, BS EN 1057, BS 2871 Part 1 Table X, EN 7396 and HTM 02-01. CPX copper tube is designed for use in Medical Gas Pipeline System (MGPS) installations and incorporates the specialist requirement of the MGPS industry to include cleanliness, packaging and usability required to attain the levels of quality as stated particularly in HTM 02-01. Specification: -- Each pipe is cleaned to have a maximum carbon level 0.20mg/dm².
- Each pipe is individually end capped and bundled in sealed polythene bags to maintain cleanliness.
- Chemical composition CU.DHP to ISO 1190-1/CW024A to EN1412.
- All copper tube is manufactured under strict quality control procedures to ISO 9001 and CE marked under the Medical Device Directive 93/42/EEC (CE0086) Class IIa.
- BSI Kitemarked
- Batch numbering for traceability is included on all pipework.
- All copper tube from sizes 12mm through to 108mm are engraved/permanently ink marked with the following information: EN 13348, nominal dimensions, manufacturer details, part no., CE Mark, Medical Device Directive to 93/42/EEC, time and date of production.
- 25 year guarantee.
Designing and Planning of Dialysis unit
Designing and Planing of Dialysis Unit
Designing and Planing of Dialysis Unit in Kidney center is very important. We keep the record of all dialysis units and kidney centers so that we design, plan and manufacture the whole dialysis unit in very low prices for more information and specification please contact 0322-4602203
Designing and planning of ICU
Designing and planning of ICU
For Designing and planning of ICU. We have one best expertise in designing and planning of intensive care unit (ICU) we have ample experience in this category. We already manufactured and installed it to one of the best and renowned hospitals nation wide for more information please contact 0322-4602203
Hermetic Doors
Hermetic Doors
Hermetic Doors also known as Hermetic sliding door or automatic doors are required where hygiene and the leakage of air control is critical. These doors takes less space and sealed completely form the edges so no air, gases or dust particles can pass through out of the operation theater. We have best team in market to install these doors with top quality material at very competitive prices. For further queries feel free to contact us 0322-4602203
Liquid Oxygen Tanks and Generators
Liquid Oxygen Tanks and Generators
Precision UK’s Liquid Oxygen Tanks and Generators and Cryogenic Bulk Tanks can be used for a variety of applications and are part of the high performance CPX LOX range. LOX Tanks are stationary, vacuum-insulated pressure vessels for storage of cryogenic liquefied gases. Low evaporation rate, ergonomic layout of instruments and controls for ease of use, carefully selected components and outstanding build quality ensure a high degree of reliability and economy in everyday use and guarantee the longevity of the vessel. Vessels are available in vertical or horizontal configurations, sized from 2,200 to 200,000 litres, and are manufactured and tested according to the European Pressure Equipment Directive 97/23 CE (PED) or to the regulations of other countries. VIE Control Panels available 500l/min-6000l/min. (Please contact sales office for further details.) Click here for oxygen generators price in Pakistan Our vessels have been in use world-wide for decades. High quality is ensured by measures, including a quality management system complying to ISO 9001.
Oxygen Generators
- The Precision UK, CPX Oxygen Generating Plant provides a centralized source of Oxygen up to 95% +/- 3% purity available in a variety of configurations.
- The stations are readily equipped with O2 analyzers, complete with an Alarm to ensure the produced purity of the O2 is controlled and not less than the programmed parameter.
- Digital Touchscreen controls with factory preset configuration shall incorporate; Pictorial easy to read images, O2 concentration %, Receiver pressure, Oxygen Capacity, Operating Instructions and Manual. *Bespoke design service available.
- Oxygen Generators are available in customer specific requirements. Our standard ranges are 100l/min – 2000l/min.
- Manufactured in our UK factory, fully tested and ready to install our generator is CE marked and is in standards compliance with ISO 10083 and conforms to HTM and EN Standards.
See our Oxygen Generator Plant in Pakistan Ready Stock
https://youtu.be/r1rRwTwuiTM General Information:- When we talk about oxygen generators price in Pakistan and oxygen refilling in Pakistan there are a lot of thoughts come into one's mind that oxygen refilling or Oxygen Generators usage is not possible and it required some sort of space science. well that's not the case here. Zirar Enterprises are one of the leading company to install Oxygen Generators in Pakistan and the good thing about these generators are that hospitals and clinics do not required liquid storage tanks. The Oxygen Generators can generate the compressed oxygen and directly supply into hospital lines. For more information regarding prices, quotations or any other queries please feel free to contact us at zirarenterprises@gmaail.com, info@zirarenterprises.com, +92-322-4602203
Medical Gas Outlets Precision UK
Medical Gas Outlets Precision UK
Medical Gas Outlets Precision UK also known as CPX Terminal Units are designed and manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. The units comprise of a first fix, second fix and a second fix valve assembly and connect medical appliances to the gas supply system. Please also see our Medical Gas Outlets Precision UK & Medical Gases & Infrastructure The first fix comprises of a brass pipeline termination cylinder with a 12mm BS EN 13348 copper pipe for brazing to the fixed pipeline system, or with a NIST BS EN 18082 (non-interchangeable screw thread) connector for connection to a hose assembly. A mounting box suitable for both surface and flush installations is also provided. CPX British Standard and DIN Standard Gas Outlets utilize a common first fix assembly. The CPX Terminal Unit is designed to enable gas probes to be connected and disconnected easily and with minimal effort and the same time as giving a strong, reliable and secure connection. They are available for oxygen, nitrous oxide, 50% oxygen/50% nitrous oxide mixture, medical air, surgical air, medical vacuum, carbon dioxide, nitrogen and AGSS. The terminal units can be flexibly integrated into any type of installation including surface, flush, bedhead and pendant and are supplied with a 3 year warranty. Test plugs are included with flush, surface, and bedhead types for first fix pressure testing on site. DIN Standard CPX DIN gas outlets are manufactured and designed in our UK factory, full metal construction, Gas Indexing as EN 13260-2, EN 9170 and Medical Gas Pipelines EN 7396.
Standards: Designed to Meet the requirements of
Medical Gas Outlet Precision UK
- HTM 02-01 Medical gas Pipeline Systems
- BS EN 7396-1 Pipelines for Compressed medical Gases and Vacuum
- BS EN 7396-2 Anaesthetic Gas Scavenging Disposal Systems
- BS EN 9170-1 Terminal Units for use with Compressed Medical Gases and Vacuum
- BS EN 9170-2 Terminal Units for Anaesthetic Gas Scavenging Systems
- C11 NHS Model Engineering Specification – Medical Gases
- BS EN 18082 Non-interchangeable Screw Threaded (NIST) Low-pressure Connectors for Medical Gases
- BS 5682 Specification for Probes Specification for Probes (quick connectors) for Medical Gases.
- Medical Device Directive 93/42/EEC (CE0086) Class IIb.
- DIN 13260-2 Part 2: Dimensions and allocation of Probes and Gas specific connection points for Terminal Units
- Available for Oxygen, Nitrous Oxide, Medical Air, CO2, Motor Air and Vacuum (other gases available on request)
- Incorporating a 12mm copper stub pipe to EN 13348 to allow easy connection to the Medical Gas Pipeline system, other options include NIST or DISS type fittings for pendants or bed head units.
- Probe insertion design incorporates parking position and full insert for 100% operation, each outlet is supplied with Flush/Surface Box or Bed Head Plate mounting options and include a 3-year warranty.
- CE marked CE0086 Class IIb Medical Device.
Reviews
There are no reviews yet.