Oxygen Automatic Manifold
Oxygen Automatic Manifold
Oxygen Automatic Manifold is mainly suitable for continuous consumption of bottled oxygen hospital. In use, the number of or even dozens of oxygen cylinders are centrally connected to the manifold pipe. The gas is filtered, decompression and pressure stabilized, and transported to the use site. AmcareMed Medical Automatic Gas Manifold is fully automatic and has pressure regulators with LED Display. Pressure unit provides a bar, Mpa or psi for measurement conversion. The fully automatic manifold system monitors cylinder tank pressure electronically, automatically changes over to the secondary tank when the primary cylinder tank is depleted and eliminates the need to manually set a priority side. The solenoid valve technology allows us to eliminate the shuttle valve and it can be realized automatically switch do not need operator debugging. In the electrical system power state, it can maintain continuous supply medical gas. It’s economical and efficient for hospital medical gas pipeline system.
Our automatic gas manifold is divided according to the number of cylinders and configuration, with a variety of structural forms, 2 * 1 cylinder group, 2 * 2 cylinder group, 2 * 3 cylinder group, 2 * 4 cylinder group, 2 * 5 cylinder group for selection, but also according to user needs and environmental requirements for special configuration.
Specification:
- LED Display full automatic manifold
- Closed box without interference
- Stainless steel diaphragm reducer, better to control flow
- With alarm system and remote alarming
- Open design to meet requirements for expansion in future
- Sustainable supply and control circuit when the power failure
- Input: 15Mpa, output: 200m3/h,0.4-0.8Mpa
- Input/output signal: 4–20mA, 485 bus communication
- Wall or floor mounts available
- 100% pressure test, safe and reliable
Manufactured by AMCAREMED
Please see our complete range of Bed Head Units, Bed Head Unit Pendants, Medical Gas Pipeline Network
For more information regarding rates, prices and quotations please feel free to contact us +92-322-4602203 Email: info@zirarenterprises.com, zirarenterprises@gmail.com
Oxygen Automatic Manifold
Oxygen Automatic Manifold is mainly suitable for continuous consumption of bottled oxygen hospital. In use, the number of or even dozens of oxygen cylinders are centrally connected to the manifold pipe. The gas is filtered, decompression and pressure stabilized, and transported to the use site. AmcareMed Medical Automatic Gas Manifold is fully automatic and has pressure regulators with LED Display. Pressure unit provides a bar, Mpa or psi for measurement conversion. The fully automatic manifold system monitors cylinder tank pressure electronically, automatically changes over to the secondary tank when the primary cylinder tank is depleted and eliminates the need to manually set a priority side. The solenoid valve technology allows us to eliminate the shuttle valve and it can be realized automatically switch do not need operator debugging. In the electrical system power state, it can maintain continuous supply medical gas. It’s economical and efficient for hospital medical gas pipeline system.
Our automatic gas manifold is divided according to the number of cylinders and configuration, with a variety of structural forms, 2 * 1 cylinder group, 2 * 2 cylinder group, 2 * 3 cylinder group, 2 * 4 cylinder group, 2 * 5 cylinder group for selection, but also according to user needs and environmental requirements for special configuration.
Specification:
- LED Display full automatic manifold
- Closed box without interference
- Stainless steel diaphragm reducer, better to control flow
- With alarm system and remote alarming
- Open design to meet requirements for expansion in future
- Sustainable supply and control circuit when the power failure
- Input: 15Mpa, output: 200m3/h,0.4-0.8Mpa
- Input/output signal: 4–20mA, 485 bus communication
- Wall or floor mounts available
- 100% pressure test, safe and reliable
Manufactured by AMCAREMED
Please see our complete range of Bed Head Units, Bed Head Unit Pendants, Medical Gas Pipeline Network
For more information regarding rates, prices and quotations please feel free to contact us +92-322-4602203 Email: info@zirarenterprises.com, zirarenterprises@gmail.com
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Bed Head Unit Horizontal
Bed Head Unit Horizontal
Bed Head Unit Horizontal widely used in hospitals and which provides patients a good care, backed by invisible medical gas copper pipe lines, electric sockets it is pertinent to notice that we at Zirar Enterprises have installed these units in many renowned hospitals. please feel free to contact us anytime for assistance +923224602203 If you want bed head unit vertical then click on this link bellow Bed Head unit vertical
Bed Head Unit Horizontal NTC 200
Bed Head Unit Horizontal NTC 200
Bed Head Unit Horizontal NTC 200 unit system is surface mounted to the comfort of patients and their proper care during their stay in the hospital. Using extruded aluminum profile alloy 6063. Design and functionality convince the patient and hospital user. Easy to installed and maintenance reduce time. 2 mm Bed Head profile aluminum thickness. The hospital bed head unit lighting parts are designed to provide the best diffusion of light. The lamp unit consisting of direct, indirect and night light. NTC series is available in both LED and fluorescent versions. It’s optical design all perfect control of the lighting. Manufactured by AMCAREMED Please see our complete range of BED HEAD UNITS Completely modular and adaptable to your needs can include:- Length according to different request
- Gas outlet, according to different standards
- Light is available in both LED and fluorescent versions. Its optical design allows perfect control of the lighting
- Power socket accept different standards and voltages
- Communication plugs (Network port, Phone…etc.)
- Designed in accordance with HTM 2022 standard
- 2 MM thickness of the profile aluminum
- The Bed Head Trunking length according to request
- Provide medical gas outlets, electric socket, lamps, electrical switches and other equipment
- The bed head unit light is available in both LED and fluorescent versions
- Its optical design allows perfect control of the lighting
- Can be customized and upgraded to meet your need
- Model: NTC 200
Degreased Medical Gas Copper Fittings
Degreased Medical Gas Copper Fittings
Degreased Medical Gas Copper Fittings CPX end feed copper fittings a.k.a Degreased Medical Gas Copper Fittings are manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. They are suitable for jointing degreased medical gas copper tube pipelines compliant to BS EN 13348, BS EN 1057 and BS 2871 Part 1 Table X as quoted in HTM 02-01 and C11. Exclusively designed for Medical Gas Pipeline Systems (MGPS), CPX copper fittings recognize and embrace the specialist requirements of the medical gas pipeline industry to include all aspects of design, cleanliness, packaging and usability required to become a successful partner for installations of pipelines compliant with HTM 02-01, C11 and BS EN 7396. Specification: -- All CPX degreased copper fittings are engraved with the following information: EN 1254, size, manufacturer details.
- Each fitting is individually bagged in a clear protective polythene bag and sealed to maintain cleanliness
- Each bag is labelled with the degreased specification, product code and production batch number.
- Cleanliness is guaranteed below 0.01 mg/cm² of hydrocarbons on the degreased surface of the fitting.
- All boxes include logical and concise labeling identification.
- 25 Year guarantee.
- Available in all sizes
Designing and Planning of Dialysis unit
Designing and Planing of Dialysis Unit
Designing and Planing of Dialysis Unit in Kidney center is very important. We keep the record of all dialysis units and kidney centers so that we design, plan and manufacture the whole dialysis unit in very low prices for more information and specification please contact 0322-4602203
Medical Gas Outlets British Standard
Medical Gas Outlets British Standard
Medical Gas Outlets British Standard are installed at medical gas systems delivery points. The base part made of brass alloy. Twice outlet connection. With shut-off valve can maintain without having to interrupt gas delivery to other outlets. Only accept British standard (BS) quick connect adapters. Different gas type with different quick connect adapters. Outlets available Wall mounting, Bed Head mounting and Pendant mounting. Manufactured by AMCAREMED Medical Gas Outlets Specification:-- Completely with EN ISO 9170-1, EN ISO 9170-2 , HTM 02-01 standard.
- Gas Type: O2, AIR,VAC, N2O, N2, CO2 are available
- O.D. 10 mm copper pipeline
- ISO32 color-coded for easy gas identification
- 100% tested for flow, leaks and cleaned
- Wall mounting, Bed Head mounting and Pendant mounting available
Medical Gas Outlets Medikar
Medical Gas Outlets Medikar
Medical Gas Outlets Medikar Q-Click gas outlet to the hospital by the medical gas supply unit to connected copper pipe and brought to the patient are the end points. Probes inserted into the socket with the relevant gas check valves are opened and gas will start crossing. Valve opens and gas locking mechanism to suppress the transition and the probe is removed and cut. Gas outlet pipe of the Q-Click base, capsule type, the main body consists of three groups. Q-Click Gas Connectors BS 5682:1998, ISO 9170:2008, EN 737, ISO 9001:2000 and are designed according to the norms of MDD 93/42/EEC. Q-Click Gas outlet other than a standard capsule and a standard to ensure the transition of the main body is enough to change. Easy disassembly and reassembly capability. Maintenance and service is also very simple. Gas outlet in the patient rooms, emergency rooms are used and the maternity ward. Q-Click gas outlet BS 5682:1998, DIN EN 13 260 and 737-6 are manufactured according to the norms. Q-Click gas outlet completely metal aluminum and brass material is manufactured from a durable and sturdy structure. It is also noticeable that we have been supplying wall mounted Oxygen Points in Pakistan for more than two decades and therefore we have ample experience in installation of Oxygen Points or Oxygen Outlets, Air Outlets, Vacuum Outlets and Nitrous Oxide outlet points, we can install it directly on the wall or typically it install on the Bed Head Panel. We have wide range of stock of British Standard Outlet Points, Din Standard Outlet Points or any other type can also be manufactured on prior order. We also manufacture OT Pendants and the outlet for OT Pendants Double Arm and Single Arm and they are 100# Portable.
Manufactured by Medikar Turkey
Please click to see our full Range of Medical Gases & Infrastructure
For more information please feel free to contact us +92-322-4602203 Email: info@zirarenterprises.com, zirarenterprises@gmail.com 
Medical Gas Outlets Precision UK
Medical Gas Outlets Precision UK
Medical Gas Outlets Precision UK also known as CPX Terminal Units are designed and manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. The units comprise of a first fix, second fix and a second fix valve assembly and connect medical appliances to the gas supply system. Please also see our Medical Gas Outlets Precision UK & Medical Gases & Infrastructure The first fix comprises of a brass pipeline termination cylinder with a 12mm BS EN 13348 copper pipe for brazing to the fixed pipeline system, or with a NIST BS EN 18082 (non-interchangeable screw thread) connector for connection to a hose assembly. A mounting box suitable for both surface and flush installations is also provided. CPX British Standard and DIN Standard Gas Outlets utilize a common first fix assembly. The CPX Terminal Unit is designed to enable gas probes to be connected and disconnected easily and with minimal effort and the same time as giving a strong, reliable and secure connection. They are available for oxygen, nitrous oxide, 50% oxygen/50% nitrous oxide mixture, medical air, surgical air, medical vacuum, carbon dioxide, nitrogen and AGSS. The terminal units can be flexibly integrated into any type of installation including surface, flush, bedhead and pendant and are supplied with a 3 year warranty. Test plugs are included with flush, surface, and bedhead types for first fix pressure testing on site. DIN Standard CPX DIN gas outlets are manufactured and designed in our UK factory, full metal construction, Gas Indexing as EN 13260-2, EN 9170 and Medical Gas Pipelines EN 7396.
Standards: Designed to Meet the requirements of
Medical Gas Outlet Precision UK
- HTM 02-01 Medical gas Pipeline Systems
- BS EN 7396-1 Pipelines for Compressed medical Gases and Vacuum
- BS EN 7396-2 Anaesthetic Gas Scavenging Disposal Systems
- BS EN 9170-1 Terminal Units for use with Compressed Medical Gases and Vacuum
- BS EN 9170-2 Terminal Units for Anaesthetic Gas Scavenging Systems
- C11 NHS Model Engineering Specification – Medical Gases
- BS EN 18082 Non-interchangeable Screw Threaded (NIST) Low-pressure Connectors for Medical Gases
- BS 5682 Specification for Probes Specification for Probes (quick connectors) for Medical Gases.
- Medical Device Directive 93/42/EEC (CE0086) Class IIb.
- DIN 13260-2 Part 2: Dimensions and allocation of Probes and Gas specific connection points for Terminal Units
- Available for Oxygen, Nitrous Oxide, Medical Air, CO2, Motor Air and Vacuum (other gases available on request)
- Incorporating a 12mm copper stub pipe to EN 13348 to allow easy connection to the Medical Gas Pipeline system, other options include NIST or DISS type fittings for pendants or bed head units.
- Probe insertion design incorporates parking position and full insert for 100% operation, each outlet is supplied with Flush/Surface Box or Bed Head Plate mounting options and include a 3-year warranty.
- CE marked CE0086 Class IIb Medical Device.
Pressure Regulators and FlowMeter Schonn
Pressure Regulators and FlowMeter Schonn
Pressure Regulators and Flow Meter Schonn Germany pressure regulators and our flowmeters for applications other than oxygen therapy (presented in the specific section) The supply of all medical gases through measurement devices requires accuracy and experience in manufacturing and development, so we underline once more that all these devices are made n full compliance with European standards and technical regulations, as well as requirements of 93/42/EEC Directive and the approval criteria set by national and international certified bodes. The CE marking procedure s carried out according to the requirements of a complete EN ISO 13485 quality system. All regulators and flow meters are rigorously tested, both n flow-meter™ own quality-assurance laboratories and by independent validated laboratories, to ensure that the products meet all the requirements of the medical applications n any foreseeable therapeutic condition. Pressure regulators and flow meters are manufactured n full compliance of ISO 10524-1 and ISO 15002. The Schönn range of Oxygen Therapy equipment provides a seamless solution between your medical gas pipeline system (MGPS) and downstream patent suppler enabling a one stop provider for all your medical gas needs. Our high end devices provide the user with light weight, highly precise and accurate equipment, which allows clinical and nursing staff to be concerned about only one thing - the patent. SCHÖNN flow meters are robust and tactile, providing the user with a quality assurance further backed by our extended 2 year warranty. Our aesthetically pleasing equipment can be supplied with our range of Bedhead trunking, SCHÖNN or Global terminal units thus eliminating any concern over equipment compatibility. The SCHÖNN range of downstream equipment can be supplied to British BS, German DIN or French AFNOR and AGA norms as well as a few others, which are available upon request.Pressure Regulators and FlowMeter Schonn
Please see our complete range of Medical Gases & Infrastructure Features:- Oxygen Flowmeters are used to provide Oxygen to the patent from Medical Gas outlets through nasal cannula or mask by regulating flow rate and passing through a humidifier when required.
- Schönn Flow meters are specially designed for medical applications and are used with oxygen. Body of the Flow meter s made of chromium plated brass, which s the most hygienic material for use with oxygen.
- The scaled tube of the Flow meter s made of poly carbonate for high resistance to breakage and s autoclavable. It s graded between 1-15 Ipm.
- The Humidifier on the Flow meter can be sterilized at 150°C.
- Our Flow meters are available for direct connection to appropriate Terminal Unit, n compliance wth EN European Norms) BS ,DIN and AGA.
- Humidifying bottle is 200ml.
Reviews
There are no reviews yet.