Oxygen Nitrous Oxide Medical Air Plant
Oxygen Nitrous Oxide Medical Air Plant
Oxygen Nitrous Oxide Medical Air Plant Medical Gas Cylinder central Plant stations are installed to provide a reliable source of supply for the Oxygen, Nitrous Oxide & Medical Air requirements of hospitals. Principal details of these Plants are usually similar. The only difference is the number of cylinders which are used in the Plants. These pressured gases are used in Operation Theaters, Intensive Care Units, Baby Care Units, Emergency Rooms and Patient Rooms.
The gas is stored at high pressure in specifically made cylinders that are connected to the Central Plant Station. The pressure in the cylinder will vary according to the gas contained in the cylinder (O2, – N2O. Air). This Plant has been designed and built specially for hospitals to comply fully with ISO 7396:2004, ISO 13485:2003, EN 46001, ISO 14971, EN 980, EN 940, EN 739, EN 737, EN 793, DIN 13260, HTM 2022 and American Standards and is CE Marked. These Plants are manufactured in compliance to ISO 9001:2000, ISO 13485:2001, EN 46001, EN 1441:1997, EN 980,EN 940, EN 739, EN 737 ,EN 793, DIN 13260, HTM 2022, American Standards and CE Marked.
Manufactured by: Medikar, Turkey
Please check our complete range of Medical Gases and Pipe Network
The Plants are proposed according to the hospital capacity as follows:
- Automatic (Oxygen, Nitrous Oxide, Medical Air ) Plant Auto System 8200
- Automatic (Oxygen, Nitrous Oxide, Medical Air ) Plant Auto System 8001
- Manual Plant
- Emergency Supply Plant System
For more information quotations, queries and rates please call or whatsapp +92-322-4602203 Email: info@zirarenterprises.com, zirarenterprises@gmail.com
Oxygen Nitrous Oxide Medical Air Plant
Oxygen Nitrous Oxide Medical Air Plant Medical Gas Cylinder central Plant stations are installed to provide a reliable source of supply for the Oxygen, Nitrous Oxide & Medical Air requirements of hospitals. Principal details of these Plants are usually similar. The only difference is the number of cylinders which are used in the Plants. These pressured gases are used in Operation Theaters, Intensive Care Units, Baby Care Units, Emergency Rooms and Patient Rooms.
The gas is stored at high pressure in specifically made cylinders that are connected to the Central Plant Station. The pressure in the cylinder will vary according to the gas contained in the cylinder (O2, – N2O. Air). This Plant has been designed and built specially for hospitals to comply fully with ISO 7396:2004, ISO 13485:2003, EN 46001, ISO 14971, EN 980, EN 940, EN 739, EN 737, EN 793, DIN 13260, HTM 2022 and American Standards and is CE Marked. These Plants are manufactured in compliance to ISO 9001:2000, ISO 13485:2001, EN 46001, EN 1441:1997, EN 980,EN 940, EN 739, EN 737 ,EN 793, DIN 13260, HTM 2022, American Standards and CE Marked.
Manufactured by: Medikar, Turkey
Please check our complete range of Medical Gases and Pipe Network
The Plants are proposed according to the hospital capacity as follows:
- Automatic (Oxygen, Nitrous Oxide, Medical Air ) Plant Auto System 8200
- Automatic (Oxygen, Nitrous Oxide, Medical Air ) Plant Auto System 8001
- Manual Plant
- Emergency Supply Plant System
For more information quotations, queries and rates please call or whatsapp +92-322-4602203 Email: info@zirarenterprises.com, zirarenterprises@gmail.com
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Bed Head Unit Horizontal
Bed Head Unit Horizontal
Bed Head Unit Horizontal widely used in hospitals and which provides patients a good care, backed by invisible medical gas copper pipe lines, electric sockets it is pertinent to notice that we at Zirar Enterprises have installed these units in many renowned hospitals. please feel free to contact us anytime for assistance +923224602203 If you want bed head unit vertical then click on this link bellow Bed Head unit vertical
Bed Head Unit Horizontal NTC 200
Bed Head Unit Horizontal NTC 200
Bed Head Unit Horizontal NTC 200 unit system is surface mounted to the comfort of patients and their proper care during their stay in the hospital. Using extruded aluminum profile alloy 6063. Design and functionality convince the patient and hospital user. Easy to installed and maintenance reduce time. 2 mm Bed Head profile aluminum thickness. The hospital bed head unit lighting parts are designed to provide the best diffusion of light. The lamp unit consisting of direct, indirect and night light. NTC series is available in both LED and fluorescent versions. It’s optical design all perfect control of the lighting. Manufactured by AMCAREMED Please see our complete range of BED HEAD UNITS Completely modular and adaptable to your needs can include:- Length according to different request
- Gas outlet, according to different standards
- Light is available in both LED and fluorescent versions. Its optical design allows perfect control of the lighting
- Power socket accept different standards and voltages
- Communication plugs (Network port, Phone…etc.)
- Designed in accordance with HTM 2022 standard
- 2 MM thickness of the profile aluminum
- The Bed Head Trunking length according to request
- Provide medical gas outlets, electric socket, lamps, electrical switches and other equipment
- The bed head unit light is available in both LED and fluorescent versions
- Its optical design allows perfect control of the lighting
- Can be customized and upgraded to meet your need
- Model: NTC 200
Bed Head Unit Precision UK
Bed Head Unit Precision UK
Bed Head Unit Precision UK - All Precision UK’s CPX Bed Head Units are manufactured under BS EN 13485 Medical Devices: Quality Management Systems. They are designed and built with a view to provide smooth lines, a stylish finish and pleasing aesthetics in order to blend into the room décor. The unit is in accordance with the British Department of Health Memorandum No 2015 (HTM 08-03). BUILT MATERIAL Built from individually heat treated extruded aluminium sections, the unit provides separate compartments for medical gases and electrical services. Furthermore, the gas compartment is ventilated to prevent a buildup of gas inside the unit. There are separate panels for low voltage (LV) and protective extra-low voltage (PELV) services. This allows access to the PELV section for servicing without having to isolate the LV circuits. MEDICAL GAS OUTLETS Medical gas outlets are located in an individual compartment which both this and the cover are completely insulated from electrical elements. Any number of medical gas outlets can be accommodated depending on the length of the unit. A provision for nurse call can be included, reading and room lights are also available to be pre-installed in the unit.Any number of electrical sockets can be accommodated depending upon the length of the unit. A complete choice of British/American/Euro US/German Schuko sockets are available. General Information: - Bed Head Unit in Pakistan or Bed Head Panel Price in Pakistan is one the most important and a must product for any hospital in Pakistan, Bed Head Units can be installed in ICU, CCU, Wards, Nurseries etc and it plays a very vital role in order to facilitate the Nursing Staff or Paramedics. We have wide range of Bed Head Panels or Bed Head Units in Pakistan. We provide manufacturing, installation and all type of services of Medical Gases, Manifolds, Oxygen Systems ETC. For more information regarding quotations, rates, prices and queries please feel free to contact us at +92-322-4602203 Email: zirarenterprises@gmail.com, info@zirarenterprises.com
Degreased Copper Tube British Standard
Degreased Copper Tube British Standard
Degreased Copper Tube British Standard is Precision UK’s CPX Degreased Copper Tube British Standard is manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. All tube is manufactured under strict quality control procedures to ISO 9001:2008. CPX tube is the only British manufactured tube that is CE marked as a class IIa Medical Device 93/42/EEC with notified body British Standards Institute under CE0086. It is suitable for jointing degreased medical gas copper fittings and other medical gas equipment compliant to BS EN 13348, BS EN 1057, BS 2871 Part 1 Table X, EN 7396 and HTM 02-01. CPX copper tube is designed for use in Medical Gas Pipeline System (MGPS) installations and incorporates the specialist requirement of the MGPS industry to include cleanliness, packaging and usability required to attain the levels of quality as stated particularly in HTM 02-01. Specification: -- Each pipe is cleaned to have a maximum carbon level 0.20mg/dm².
- Each pipe is individually end capped and bundled in sealed polythene bags to maintain cleanliness.
- Chemical composition CU.DHP to ISO 1190-1/CW024A to EN1412.
- All copper tube is manufactured under strict quality control procedures to ISO 9001 and CE marked under the Medical Device Directive 93/42/EEC (CE0086) Class IIa.
- BSI Kitemarked
- Batch numbering for traceability is included on all pipework.
- All copper tube from sizes 12mm through to 108mm are engraved/permanently ink marked with the following information: EN 13348, nominal dimensions, manufacturer details, part no., CE Mark, Medical Device Directive to 93/42/EEC, time and date of production.
- 25 year guarantee.
Degreased Medical Gas Copper Fittings
Degreased Medical Gas Copper Fittings
Degreased Medical Gas Copper Fittings CPX end feed copper fittings a.k.a Degreased Medical Gas Copper Fittings are manufactured in the UK under BS EN 13485 Medical Devices: Quality Management Systems. They are suitable for jointing degreased medical gas copper tube pipelines compliant to BS EN 13348, BS EN 1057 and BS 2871 Part 1 Table X as quoted in HTM 02-01 and C11. Exclusively designed for Medical Gas Pipeline Systems (MGPS), CPX copper fittings recognize and embrace the specialist requirements of the medical gas pipeline industry to include all aspects of design, cleanliness, packaging and usability required to become a successful partner for installations of pipelines compliant with HTM 02-01, C11 and BS EN 7396. Specification: -- All CPX degreased copper fittings are engraved with the following information: EN 1254, size, manufacturer details.
- Each fitting is individually bagged in a clear protective polythene bag and sealed to maintain cleanliness
- Each bag is labelled with the degreased specification, product code and production batch number.
- Cleanliness is guaranteed below 0.01 mg/cm² of hydrocarbons on the degreased surface of the fitting.
- All boxes include logical and concise labeling identification.
- 25 Year guarantee.
- Available in all sizes
Medical Air Plant – British Standard
Medical Air Plant - British Standard
Medical Air Plant - British Standard - Precision UK’s CPX Medical Air Plant is manufactured under BS EN 13485 Medical Devices: Quality Management Systems. It provides a centralized source of medical air, available in simplex to multi-pump configurations dependent on individual requirement.
Specification:
- Specific Benefits Include
- Fully complies to HTM 02-01, HTM 2022, C11, BS EN 7396, CE0086 Class IIb
- CE marked under Medical Device Directive 93/42/EEC
- CPX® branded solid British design
- Control and highly visible indication panel
- All interconnecting pipework is included
- Outlet pipework for connecting to the pipeline
- Anti-vibration mounts on all compressors
- Isolator to each pump unit as standard
- Alarm and BMS outputs for remote status indication
- Digital display touchscreen with user interface
- 400Kpa, 700Kpa and 1000Kpa output versions available
- All settings are factory set and verified with certificates of inspection
- Each plant has a full warranty of 12 months from its commission date
Reviews
There are no reviews yet.