Due to surge in Dollar Rate, kindly contact us to confirm current pricing, thanks.

SEW High Voltage Proving Unit (DCV) Model 2713 PU

SEW High Voltage Proving Unit (DCV) Model 2713 PU – For prices and quoted please call us at 03224602203 or email us at info@zirarenterprises.com, zirarenterprises@gmail.com

SEW High Voltage Proving Unit (DCV) Model 2713 PU Proving Second source equivalents or Compatible models. The high voltage proving unit for voltage testers output a DC voltage of around 5000Vdc (factory setting). This unit has been designed to deviate most of the voltage testers and the voltage detectors. It can be used with most of the phasing sticks and voltage testers which can accept 5000V input. This unit is basically a low current 5000Vdc supply. The output current is limited. To save battery life, it is recommended to
depress the test button for short period of time only. Proofing PC xxk – Multifunction Voltage Testers The master pole must be connected to the positive socket of the proofing unit. The slave pole must be connected to the negative socket of the proofing unit. The test button of the proofing unit must be depressed for a short time only. During that short time, the neon voltage detector must lit and the panel meter must deviate and show increase in the voltage, then come back down.

The high voltage proving unit for high voltage testers is utilized to determine if the devices under test are functionally
working. The high voltage proving unit is not a calibrator and can’t be utilized for calibration. The high voltage proving unit for high voltage testers can be utilized to proof contact devices on a momentary basis (press on, check, release).

 FEATURES
● Designed to proof:
-Phasing sticks.
-High voltage detectors (contact type only, not to be used with non contact proximity detectors.)
-High voltage and voltage testers.
● Battery operated.
● Led indicates when power is “ON”.
● Small and hand-held.
● Quick connection with normal 4mm test leads.

 SPECIFICATIONS
 
 Voltage settings
(Internal Jumpers Selectable)
 500Vdc / 1000Vdc / 2500Vdc
/ 5000 / 5000Vdc (default setting)
 Over-current protection  Yes
 Power on indicator
 Yes
 Operating temperature  -5°C to 45°C
 Storage temperature  -10°C to 55°C
 Dimensions  205(L) × 90(W) × 55(D)mm
 Weight (battery included)  Approx. 510g
 Power source  1.5V (AA) × 6 or equivalent

 

Description

SEW High Voltage Proving Unit (DCV) Model 2713 PU – For prices and quoted please call us at 03224602203 or email us at info@zirarenterprises.com, zirarenterprises@gmail.com

SEW High Voltage Proving Unit (DCV) Model 2713 PU Proving Second source equivalents or Compatible models. The high voltage proving unit for voltage testers output a DC voltage of around 5000Vdc (factory setting). This unit has been designed to deviate most of the voltage testers and the voltage detectors. It can be used with most of the phasing sticks and voltage testers which can accept 5000V input. This unit is basically a low current 5000Vdc supply. The output current is limited. To save battery life, it is recommended to
depress the test button for short period of time only. Proofing PC xxk – Multifunction Voltage Testers The master pole must be connected to the positive socket of the proofing unit. The slave pole must be connected to the negative socket of the proofing unit. The test button of the proofing unit must be depressed for a short time only. During that short time, the neon voltage detector must lit and the panel meter must deviate and show increase in the voltage, then come back down.

The high voltage proving unit for high voltage testers is utilized to determine if the devices under test are functionally
working. The high voltage proving unit is not a calibrator and can’t be utilized for calibration. The high voltage proving unit for high voltage testers can be utilized to proof contact devices on a momentary basis (press on, check, release).

 FEATURES
● Designed to proof:
-Phasing sticks.
-High voltage detectors (contact type only, not to be used with non contact proximity detectors.)
-High voltage and voltage testers.
● Battery operated.
● Led indicates when power is “ON”.
● Small and hand-held.
● Quick connection with normal 4mm test leads.

 SPECIFICATIONS
 
 Voltage settings
(Internal Jumpers Selectable)
 500Vdc / 1000Vdc / 2500Vdc
/ 5000 / 5000Vdc (default setting)
 Over-current protection  Yes
 Power on indicator
 Yes
 Operating temperature  -5°C to 45°C
 Storage temperature  -10°C to 55°C
 Dimensions  205(L) × 90(W) × 55(D)mm
 Weight (battery included)  Approx. 510g
 Power source  1.5V (AA) × 6 or equivalent

There are no reviews yet.

Add your review